Hamilton Beach Fast Pop 68770 Mode D'emploi page 3

840198501 ENv01.qxd:Layout 1
How to Make Frozen
Treats
1
Allow base to freeze completely,
at least 24 hours. Make sure the
unit sits level in freezer.
5
1/10/11 1:58 PM Page 3
2
Insert pop sticks into the base
before adding liquid.
Wait approximately 9–11
minutes. A small amount of
liquid may still look unfrozen
on the surface. This will be
absorbed into the pop when
removed.
BEFORE FIRST USE: Wash all parts before first use. Turn base upside down to dry
and allow excess water to drain. Some water drainage is normal and does not mean
the product is leaking or broken. When completely dry, place base in freezer for at
least 24 hours. Set freezer to the coldest temperature setting.
NOTE: Liquid contained in base is nontoxic.
Do not place base in dishwasher.
Do not use for other than intended purpose.
This is not a toy or children's product.
3
Pour chilled liquid into the pop maker, making sure not to fill past the
top line of the pop slot. A measuring cup helps prevent spills.
6
4
Insert removal tool through pop
stick until resting in both notches
on the top of the unit. Gently
rotate removal tool until you
feel the pop release from base.
Do not use pop sticks or a
removal tool other than those
provided by Hamilton Beach
Brands, Inc. Visit
www.hamiltonbeach.com for
more information on replace-
ment parts.
3