Maintenance / Guarantee - Amplicom NL 200 Mode D'emploi

Maintenance / Guarantee

4. The call is then switched back to the
NL200.
Redialling the last number dialled
1. If the NL200 is in Standby mode, press
and hold the Volume Up button (5) for
two seconds.
2. The mobile phone redials the last
number dialled.
Cancelling the dialling process / Ending a call
1. Press the Power button (4) briefly to
cancel the dialling process and/or end
the call.
Taking a call
1. Press the Power button (4) briefly to
take a call.
Rejecting an incoming call
1. Press the Power button (4) for two
seconds to reject a call.
16
Voice command
You can control the voice command functions
of the mobile phone via the NL200. A condi-
tion for this is that your mobile phone sup-
ports the functions. For more information,
refer to the operating manual provided with
your mobile phone.
1.
2.
4 Maintenance / Guarantee
Maintenance
Service−Hotline: Tel. 0844 800 6503
If the NL200 is in Standby mode, press
Power button (4) briefly.
The mobile phone now receives the
voice commands via the microphone in
the NL200.
S
Clean the housing surfaces with a
soft, fluff−free cloth.
S
Never use cleaning agents or
solvents.