DreamLED SPL-500 Manuel D'instructions page 4

INSTALLATION
This lamp is intended only for outside use.
Choose a stable, solid and supportive surface and make sure the lamp is mounted with
the solar panel faced towards the sun. Mounting height is 3~5 meters.
There are 2 installation options:
1.Wall mount
Using the supplied normal screws andd expansion plugs for walls.
.
2.Standing on a flat surface
Open the 2 "feet" on the bracket and put it on a flat surface.
Use the supplied screwdriver (side with the hex screwdriver) to loosen the bracket.
•
Adjust the bracket to the appropriate angle and fix the screw tightly.
Pull out the light panel and adjust it to the preferred lighting angle. Fix the screw
•
tightly with the supplied screwdriver (side with the normal screw driver).
Fix the lamp onto the wall or place it on a flat surface using the correct mounting parts.
•
MOTION SENSOR RANGE
Complete detection area is 180°. Actual range of the motion detection sensor depends
on mounting height.
-4-