Tools Required - Sentiotec INFRA+ Mode D'emploi

Instructions for installation

1.1. Tools required

● Hammer with a wooden head or a mallet
● Cordless screwdriver with bits for cross-head screws and Torx
● Roller tape measure
● Drill bits with a diameter of 3 mm, 10 mm, 20 - 30 mm (for sauna heater
power cable)
● Spirit level
● 1.5 mm hexagonal socket wrench
● Utility knife
● Ladder
● Backsaw
This symbol indicates tips and useful information
Pre-drill
Cut to real measurement with backsaw
Check the right angle:
80 cm
p. 4/38