Technical Parameters; Specifications - METRICA YPB 100-001 Mode D'emploi

Calibration
Press TARE/CAL key; the value of the necessary weight will flash on display
1.
Put the calibration weight on the pan. Wait until the value of the calibration
2.
weight stops flashing and is fixed on the display (e.g. 100.00 g, 200.00 g, etc.,
depending on the model)
Remove the weight from the pan
3.
The balance will enter weighing mode and will display 0.000g.
4.
Note: Each balance includes the necessary weight to complete external calibration,
but the capacity, which is 2kg, is not included.
Tare function
1.
Put the receptacle on the weighing pan; its weight will be displayed
2.
Press TARE/CAL key and the reading on the display will automatically be set to
0.00g; tare is complete
3.
If the receptacle is removed from the pan, the corresponding weight, with
negative value will be displayed.
4.
Press the TARE/CAL key again and the value on display will be set to zero again
Weighing unit selection
Press UNIT key to select the desired weighing unit from g, kg, ct, T, TAR, dr, PKT,
GN, TMR, gsm, tlJ, mo, dwt, oz, lb, tlT, ozt, tlH, %
Piece counting function
Press the COU button
1.
Press the TARE/CAL button repeatedly to cycle through different counts. This function
2.
can be used with counts of 10, 20, 50, 100, 150, 200, 250, or 500 pieces.
Put the corresponding number of pieces on the pan, press the PCS button to confirm.
3.
Remove the pieces from the pan and the balance is ready to be used in piece
4.
counting mode.
To return to weighing mode, simply press the COU button again
5.
RS232 Interface
Balance (9 pins) Printer/ PC (9 pins)
RXD(Input) 2 ------------------------- 3
(Output) 3 -------------------------- 2
(Ground) 5 --------------------------- 5
•
The default Baud Rate is 9600 bps
•
The data format is: 10 bits; 0 as start bit, 1 as stop bit,
8 digits (ASCII code)
•
No odd and even numbers
adjustments Data output format:
1 2 3 4
Type Space Space ±
or *
9 10 11 12
Data Data or Data or Data
dot dot
YPB Models • All Rights Reserved •
www.labbox.com
.
5 6 7 8
Data Data Data Data
13 14 15 16
Unit 1 Unit 2 End Return
II. Specifications

Technical Parameters:

Model YPB 100-001 200-001 500-001
Capacity 0-100 g 0-200 g 0-500g
Readability
Repeatability
Linearity
Pan size
Dimensions
Net weight
Output
YPB Models • All Rights Reserved •
www.labbox.com
600-001 1K0-001 2K0-001
0-600g 0-1Kg 0-2Kg
0.01 g
± 0.02 g
± 0.02 g
125X163mm
225* 220 *80 mm
2000 g
110/220-240 V