Grounding Instructions - Kenmore 592-857130 Consignes D'installation

WARNING
Improper use of the grounding plug can result in a
risk of electric shock .
To avoid risk of electrical shock or death, this oven
must be grounded and plug must not be altered .
GROUNDING
INSTRUCTIONS
This appliance must connected
to a grounded, metallic,
pemanent wiring system or an
eguipment groundin conductor
should be run with the
circuit conductors and connected to the equipment
grounding terminal or lead on the appliance .
Grounding reduces risk of electric shock by providing
an escape wire for the electric current if an electrical
short occurs . This oven is equipped with a cord having
a grounding wire with a grounding plug . The plug must
be plugged into an outlet that is properly installed and
grounded . See Installation Instructions .
Consult a qualified electrician or servicer if grounding
instructions are not completely understood, or if doubt
exists as to whether the oven is properly grounded .
Do not use an extension cord . If the product power
cord is too short, have a qualified electrician install a
three-slot receptacle . This oven should be plugged
into a separate 60 hertz circuit with the electrical
rating as shown in specifications table . When the
oven is on a circuit with other equipment, an increase
in cooking times may be required and fuses can be
blown .
Microwave operates on standard household current,
110- 120V .
MD5_XAC-03653B_EN+FR.indb 5
All manuals and user guides at all-guides.com
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
FEDERAL
COMMUNICATIONS
COMMISSION
RADIO FREQUENCY
INTERFERENCE
STATEMENT (U.S.A.
ONLY)
This equipment generates and uses ISM frequency
energy and if not installed and used properly, that
is in strict accordance with the manufacturer's
instructions, may cause interference to radio and
television reception . It has been type tested and
found to comply with limits for ISM Equipment
pursuant to part 18 of FCC Rules, which are designed
to provide reasonable protection against such
interference in a residential installation .
However, there is no guarantee that interference will
not occur in a particular installation . If this equipment
does cause interference to radio or television
reception, which can be determined by turning the
equipment off and on, the user is encouraged to
try to correct the interference by one or more of the
following:
• Reorient the receiving antenna of the radio or
television .
• Relocate the microwave oven with respect to the
receiver .
• Move the microwave oven away from the
receiver .
• Plug the microwave oven into a different outlet so
that the microwave oven and the receiver are on
different branch circuits .
The manufacturer is not responsible for any radio
or television interference caused by unauthorized
modification to this microwave oven . It is the
responsibility of the user to correct such interference .
5
2009-05-11 3:17:04