Installation; Before The Installation - Electrolux EHXP8H10KK Notice D'utilisation

18 www.electrolux.com
Problem
E and a number come on.
E3 comes on.
E4 comes on.
E7 comes on.
E8 comes on.
E9 comes on.
7.2 If you cannot find a
solution...
If you cannot find a solution to the
problem yourself, contact your dealer or
an Authorised Service Centre. Give the
data from the rating plate. Give also
three digit letter code for the glass
ceramic (it is in the corner of the glass

8. INSTALLATION

WARNING!
Refer to Safety chapters.
Possible cause
There is an error in the
hob.
The electrical connection is
incorrect. The supply volt‐
age is out of range.
There is and error in the
hob because a cookware
boils dry. Overheating pro‐
tection for the zones oper‐
ates.
The cooling fan is blocked. Check if objects block the
The electrical connection is
incorrect. The hob is con‐
nected only to one phase.
There is an error of the in‐
terface.
surface) and an error message that
comes on. Make sure, you operated the
hob correctly. If not the servicing by a
service technician or dealer will not be
free of charge, also during the warranty
period. The instructions about the
Service Centre and conditions of
guarantee are in the guarantee booklet.

8.1 Before the installation

Before you install the hob, write down the
information bellow from the rating plate.
The rating plate is on the bottom of the
hob.
Remedy
Disconnect the hob from
the electrical supply for
some time. Disconnect the
fuse from the electrical
system of the house. Con‐
nect it again. If E comes on
again, speak to an Author‐
ised Service Centre.
Speak to a qualified electri‐
cian to check the installa‐
tion.
Deactivate the hob and let
it cool down. Activate the
hob again. If the cookware
was the problem the mes‐
sage goes out. If the mes‐
sage comes on contact an
Authorised Service Centre.
cooling fan. If the message
comes on again contact an
Authorised Service Centre.
Speak to a qualified electri‐
cian to check the installa‐
tion. Refer to the connec‐
tion diagram.
Deactivate the hob and ac‐
tivate it again. If the mes‐
sage comes on contact an
Authorised Service Centre.