Troubleshooting - Tineco FLOOR ONE S5 STEAM Serie Mode D'emploi

Troubleshooting

Problem
The appliance does not turn on
Weak suction
Brush roller tangled
indicator blinking
Voice prompt:
Please clean the brush
roller
CWT empty indicator
blinking
Voice prompt:
Clean Water Tank empty,
please refill water and
cleaning solution
DWT full indicator
blinking
Voice prompt:
Please clean Dirty Water
Tank
LED loop illuminates red
Voice prompt:
Please begin self-
cleaning cycle
Self-cleaning icon
blinking
Note:
If the above troubleshooting guide fails to provide a solution, please visit our website
www.tineco.com for further support.
Possible cause
The power cord is not plugged
in, or the socket is not
energized
The dry filter is not installed, or
the dry filter is dirty
The brush roller is not installed
The brush roller is blocked
CWT is empty
The dirty water in DWT has
reached the MAX line
Dirt sensor malfunction or
blocked
Brush roller is dirty
18
Solution
Ensure that the socket is
energized and the power cord
is plugged in
Install the dry filter or clean
and allow it to dry completely
Install brush roller correctly
Remove blockages
Refill CWT
Empty the dirty water and then
reinstall the DWT
Remove blockages, clean the
debris channel, or restart
Start self-cleaning