Tineco FLOOR ONE S5 STEAM Serie Mode D'emploi page 18

Brush Roller Self-cleaning
Brush Roller Cover
Squeeze latches on the cover and pull upward to
remove.
When replacing, always latch the brush cover into
place to avoid leakage.
1. Place the appliance on the storage tray after use, the
2. When you hear the voice prompt "please begin self-
3. Once complete, please clean up the DWT.
Note:
Before self-cleaning cycle, please plug in and ensure the
water level in the CWT exceeds 40%.
②
①
sensor will auto-detect the level of dirt.
cleaning cycle," press the self-cleaning button and
begin the process.
Rinse with water.
16