Technical Specifications - SOUNDMASTER ICD2020 Mode D'emploi

USB driver or MP3
player is not detected.
NetRemote does not
show or connect to
ICD2020
All other undetermined
cases.
Power supply
Power input
Power output
DAB+ range
FM range
®
Bluetooth Version
Connectivity
Audio power output
Standby consumption
with setting "Keep
network in standby"
Technische Änderungen und Druckfehler vorbehalten
Copyright by Woerlein GmbH, 90556 Cadolzburg,
Vervielfältigung nur mit ausdrücklicher Genehmigung der Woerlein GmbH
1. Check if the USB driver or MP3 player is plugged properly.
2. Some USB hard disks need external power supply, make sure it
is connected to the power.
3. Not all MP3 players can be read directly on the device – use an
USB drive instead.
1. Reopen the App.
2. If you have several streaming from several devices at the same
time, it may cause crash, reboot ICD2020 and/or your device.
ICD2020 may process large amount of data after a period of
operation, no matter in which mode, it will cause the system
freeze or malfunction. Reboot ICD2020 if necessary.
The normal function of the product may be disturbed by strong
Electro-Magnetic
Interference. If so, simply reset the product to resume normal
operation by following the instruction manual. In case the function
could not resume, please use the product in other location.
The device may malfunction when used in areas with strong radio
interference. The device will work properly again once there is no
more interference.
Under the environment with Conducted Immunity disturbance, the
sample may malfunction. It will automatically recover to normal
when the Conducted Immunity disturbance stopped.

TECHNICAL SPECIFICATIONS

: Use only the supplied adapter
: 100-240V~50/60Hz
: DC 18V 1.2A
: Band III 174.928 - 239.200 MHz
: 87.5 – 108MHz
: Version 2.1 + EDR
: WiFi Dual modes to support 2.4GHz and 5GHz WiFi system
: 2×15 W
: < 2W
www.soundmaster.de
ICD2020 / English Instruction Manual
25