Aux In; Cd Mode - SOUNDMASTER ICD2020 Mode D'emploi

Connecting DVD player / Set-Top Box / TV outputs to analogue inputs from the sound board.
Use a RCA audio cable to connect the DVD player/TV outputs with the AUX (L/R) input socket
from the sound board.
Notice!
Improper operation can result in material damages!
Do not insert any recording media that deviate from the standard CD format (eg: mini-discs) into
the CD player. These may not be played and ejected correctly. Insert only one disc at a time
into the CD player.
1. Press button on the unit and press
or press the "CD" button on remote control to choose CD.
2. Put a disc (with printing side facing up)
functions will not work while the disc is loading. After Reading the display shows the
following information in CD mode:
•

CD mode

•
Time
•
Elapsed playback time in minutes
•
Track number
•
Playback status (playing/pause)
The Playback will begin automatically once the table of contents is read. The display will show
"No Disc" when the unit is set to CD mode and there is no CD inside.
⚫ To pause/resume playback of the CD, press the "
⚫ To switch to the next track, press the "
⚫ To fast forward through a track, press and hold the "
⚫ To switch to the previous track, press the "
⚫ To fast backward through a track, press and hold "
⚫ To stop CD playback, press the "
⚫ To eject the disc press in stop mode the "

AUX IN

CD MODE
till "CD" displayed, then press "OK" on the knob
The display will say "Loading" and the disc
inside.
" button
" button once
" button twice
" button.
" button on the remote control.
" button on the unit.
21
ICD2020 / English Instruction Manual
" button.