How To Confirm The Frequency Of Each Course Used - Sammic HM-1000 Manuel D'instructions

HOW TO CONFIRM THE FREQUENCY OF EACH COURSE USED

Operational flow
1.
2.
3.
4.
5.
6.
*
By touching Start key it is possible to check all 10 course memory functions.
7.
NOTE:
The cancellation for the used No. can be done by inputting "0" when the display shows the number of times
used. When display shows "0000" flashing touch "Memory" key to finish the cancellation procedure.
Touch "Clear" Key
Touch "Time" key
Touch number
"9" four times
Touch "Start" key
Touch "Start" key again
Touch "Start" key again
Touch "Clear" key
Display Window
"0" will appear on the display.
Stage 1 bar & lower colon lights.
The "99.99" will appear on the
display.
The "99.99" will start flashing.
Display shows number of times
course 1 has been used,
ie 428 times used.
Display shows number of times
course 2 has been used,
ie 1125 times used.
The "0" will appear on the display.
16