Elta GWK-2200.3T Manuel D'instructions page 13

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

automatically: after 30 minutes kettle turn into keep warm mode into standby
status.
4) In keep warm mode, corresponding pre-set temperature indicator light flash
until keep warm stop. Other lights go out
5) Keep warm temperature range is -/+3 degree.
Warning:
1. This product is designed only for boiling water indoors, with other liquid
filled or for other purpose forbidden.
2. When using the product, be sure to fill with the water and then turn on the
power.
3. Do not exceed Max. rated capacity when filling the water, to avoid the
boiling water overflow to cause burns. Water volume can not exceed
4. Cut off the power and then move the electric kettle; do not touch other parts
of the kettle filling with boiling water except for handle, to prevent burns.
5. In use process, do not hang the power wire near the table or similar part, to
avoid any danger.
6. In order to prevent the water from eroding any internal part, do not immerse
the electric kettle into any liquid for cleaning. For details, refer to "Cleaning
and descaling".
7. If the supply cord is damaged, it must be replaced by the manufacturer, its
service agent or similarly qualified persons in order to avoid a hazard.
8. This appliance can be used by children aged from 8 years and above if
they have been given supervision or instruction concerning use of the
appliance in a safe way and if they understand the hazards involved.
Cleaning and user maintenance shall not be made by children unless they
are older than 8 and supervised.
9. Keep the appliance and its cord out of reach of children aged less than 8
years.
10. If the kettle is overfilled, boiling water may be ejected.
11. The appliance must not be immersed.
12. The kettle is only to be used with the stand provided.

Publicité

Table des Matières
loading

Produits Connexes pour Elta GWK-2200.3T

Table des Matières