Product Overview - Elta GWK-2200.3T Manuel D'instructions

Product overview:

1. Voltage: 220-240V; frequency: 50/60Hz; power: 1850-2200W;
capacity: 1.7L; standby power consumption: below 0.5W;
2. Intelligent temperature controlled for heating, with optional 50°C, 70°C,
80°C, 90°C, and 100°C heating temperature;
3. Intelligent thermal insulation, with optional 50°C, 70°C,80°C and 90°C
insulation temperature.
4. three soft keys + six LED luminescent tube + The kettle colorful lights;
5. " " key: Power switch to start / stop heating/set 100°C;
6.: " "key:Thermal insulation option key to select or deselect the thermal
insulation;
7. " " key : Temperature selection key, 50°C, 70°C, 90°C, 100° C;
Notice before use:
1. Before use, check that the voltage required by electric kettle is consistent
with that that your used. If not consistent, do not use this product to avoid
accident!
2. Use this product on a level surface to prevent the damage to the product
due to dumping to cause accident. In use, the power plug of the electric
kettle shall be connected with the power socket firmly.
3 The product is equipped with dry-run automatic power off device, with
power cut off automatically in case of dry-run overheating to prevent the
damage to the product.
4. During the use, if the kettle boils dry accidently, pull out the power plug
and add the right amount of cold water into it to reduce the temperature of
the electric hot tray. The power off device will automatically work after the
temperature meets the requirement .Pour out the first cooked water to
normally use the electric kettle.
5. There are four indicators on the key panel, to indicate the selected
temperature (50°C,70°C, 80°C and,90°C), indicating function starting
temperature setting and power