Declaration Of Compliance; Installation - Delta FT-74G Serie Instructions Pour L'installation Et L'emploi

DECLARATION OF COMPLIANCE

The manufacturer declares that the appliances are compliant with the prescriptions of the EEC norm
90/396. The installation must be done observing the norms in force particularly concerning room
ventilation and discharging gas emissions.
N.B. The manufacturer declines any responsibility for direct or indirect damage caused by inproper
or icorrect installation, maintenance or use of the appliance, as in all the other cases considered in
the items of our sales conditions.
MODEL
FT*-74G***
FT*T-74G***
FT**-76G***
FT**T-76G***
FT**-78G***
FT**T-78G***
FT**-712G***
* L= Smooth hotplate R= Corrugated hotplate
** L= Smooth hotplate R= Corrugated hotplate L/R= ½ Smooth +1/2 Corrugated
*** = Chromium-plated hotplate
INSTALLING THE APPLIANCE
• The operations for installing, conversions for use with other types of gas and starting up must be done only by
qualified personnel whose qualifications comply with the norms in force.
• The gas installation, the electrical connections and the rooms in which the appliances are installed must comply
with the norms in force in the Country in which the installation is effecte; above all, the appliance must be installed
in a well ventilated room, preferably under an extractor hood, so as to ensure the complete extraction of gas
emissions which are formed during combustion. The air necessary for combustion is 2
installed.
CHECKING FOR CORRECT VENTILATION
Ensure that the air outlets in the place of work are sufficient to guarantee the necessary air exchange, as stated in
paragraph 4.3 of the UNI-CIG. norm 8723.
We remind you that, appliances installed in buildings for public use must meet the following requirements:
In Italy:
1) Installation regulations
Installation and maintenance of the appliance must be carried out following the correct procedures and written
regulations texts in use, in particular:
• safety norms against fire and panic in public buildings
a) general instructions
- For all appliances:
the connection, starting up of the installation, and of the appliances, ventilation and discharging fumes must be
carried out in accordance with the manufacturers instructions by professionally specialized personnel in
compliance with the UNI-CIG norm 8723. The electrical part must comply with the E.I.C. norms in force;
furthermore, the VVFF disposals in force must be observed.
In Switzerland:
The appliance must be installed in accordance with the safety norms in force.
Installation, coversion and repairs of appliances for professional use, as also the withdrawal for breakdowns and gas
supplies may be effected only on the base of a maintenance contract drawn up with an authorized sales agent and
observing the technical norms. The appliance may be installed as a single element or as a part of the series of appliances
of our production. It is necessary to observe a minimum distance of 10 cm from the appliance to prevent contact with
walls of inflammable material; adequate measures must also be taken to ensure thermal insulations of inflammable
GB

INSTALLATION

DIMENSIONS GAS CONNECTION
40x70x90h
40x70x29h
60x70x90h
60x70x29h
80x70x90h
80x70x29h
120x70x90h
28
IE
ISO R7
R ½GM
R ½GM
R ½GM
R ½GM
R ½GM
R ½GM
R ½GM
NOMINAL HEAT
OUTPUT
TOTAL KW
7
7
10,5
10,5
14
14
21
3 /h per kW of power
m