Product Overview; Introducing The Product; Description Of The Product; Models And Characteristics - Motorisation+ FLASH24 Instructions Et Avertissements Pour L'installation Et L'usage

EN

2 - INTRODUCING THE PRODUCT

2.1 - Description of the product

The FLASH24 gear motors are destined to be installed in sys-
tems for the automation of gates with hinged doors.
The FLASH24 gear motors have been designed and constructed
2.2 - Model and technical characteristics
Code
FLASH24
TECHNICAL DATA
Torque
Working cycle
Opening time at 90°
Control unit
Power supply
Absorption
Engine power
Capacitor
Thermoprotection
Degree of protection
Dimensions (L-P-H)
Weight
Operating temperat.
Leaves maximum weight

2.3 - Description of the control unit

The CC24 control unit is a modular system for the control of Motori-
sation Plus motors for the electric opening and closure of swing and
sliding gates, barriers and garage doors.
WARNING:
the power module must
always be connected/
disconnected with the
control unit not powered
up!
18
Description
For swing gates with maximum length 3,5 m, 24 Vdc motor, without encoder, with opening and closing
mechanical stops
MODELS
1
to be fitted onto hinged doors within the weight limits indicated
in the technical specifications table. The use of gear motors for
applications which differ from those indicated above is prohibited.
Nm
%
sec
Vac (Vdc)
A
W
µF
°C
IP
mm
Kg
°C
Kg
The CC24 menu structure allows easy setting of working times and
operating modes. All other, improper, use of the control unit is for-
bidden.
2
FLASH24
250
80
18-25
CC24FLASH
24 Vdc
5
120
-
-
IP67
412 - 346 - 160
10,8
-20°+55°
600