AGA marvel AMLFDR23C Mode D'emploi page 10

INSTALLATION
To adjust the flipper mullion:
1. Loosen the screw located on the flipper mullion hinge.
2. Adjust flipper mullion height. For proper connection with
the flipper mullion guide, there should be a separation
about the thickness of a coin (0.060 inches, or 1.5 mm)
between the guide and flipper mullion.
Flipper
mullion
Adjusting flipper mullion height
3. Re-tighten screw.
10
Flipper
mullion
hinge
Figure 17
Adjusting flipper mullion screw
Thickness
of a coin
Figure 18
Flipper
mullion
Screw
Mullion
guide