Use As Jogger - Klarfit Kiddy King Mode D'emploi

EN
48

USE AS JOGGER

To attach the jogger fork arms
Fork arms
Before installing the fork arms, first remove the drawbar if it is still on
1
the trailer.
The fork arms are held by a spring pin and a locking pin. Press the
2 spring pin and slide the left fork arm into the holder on the left side of
the trailer as shown.
When the spring pin engages in the hole in the bracket, locate the
locking pin (attached to the trailer frame) and insert the pin through
the bracket and into the hole in the fork arm. The pin should go
3
completely through the fork and the bracket. Once the pin is through,
turn the spring clip downwards until it engages over the pin head. Pull
on the locking pin to ensure it is securely seated.
Fixing screws
Front wheel