Klarfit Kiddy King Mode D'emploi page 47

How to attach the drawbar to the coupling
1
Push the connecting piece on
the drawbar onto the coupling.
How to remove the bicycle trailer from the coupling
1
Remove the securing strap by
detaching it from the ring and
frame.
2
Insert the locking pin through
the connector and the hole in
the coupling. Once the pin is
through, turn the spring clip
down until it engages over the
pin head. Pull on the locking pin
to ensure it is securely seated.
2
Remove the locking pin and
detach the drawbar from the
coupling.
3
Wrap the safety strap around
the frame of the bicycle and
hook it onto the ring on the
drawbar.
3
The coupling can remain on the
bicycle and does not have to be
reinstalled each time.
EN
47