Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
EN
OVEN INSTALLATION
1. Place the oven adjacent to the wall or cabinet
opening. Plug the power cord into the electrical
outlet.
2. Carefully guide the assembled oven into the prepared
opening. Slide the oven on the Exhaust Duct
Assembly.
See Illustration 6
3. Secure the Exhaust Duct Assembly with the four
screws A.
Illustration 6
FRAME INSTALLATION
1. Position the FRAME ASSEMBLY to be square with the
oven. Carefully place the FRAME ASSEMBLY on the
oven. See Illustration 7.
2. Check that it is level and then secure with two
SCREWS B. Secure the bottom portion of the FRAME
ASSEMBLY with the two remaining SCREWS B. See
Illustration 8.
ASSEMBLY INSTRUCTIONS
Illustration 7
Illustration 8
7
Publicité
Table des Matières
