Banner BBT HD1+ Manuel De L'utilisateur page 9

IN VEHICLE:
SURFACE CHARGE
IN VEHICLE? YES
OUT OF VEHICLE:
SURFACE CHARGE
IN VEHICLE? NO
B. The tester will resume testing after it detects
that the surface charge is removed.
10. Test the battery for few seconds.
11. Press the ◄ ► key to select battery fully
charged or not if tester asks. Press «ENTER» to
confirm choice.
12. When the test is completed, the display shows the actual volts and the actual
CCA and internal resistance. {Press the ◄ ► key to read: SOH (STATE OF
HEALTH) and SOC (STATE OF CHARGE)}.
13. One of the six test results will be displayed:
GOOD & PASS
*The battery is good and capable of holding a
charge.
GOOD & RECHARGE
*The battery is good but needs to be recharged.
Version 04/2020
TURN HEADLIGHTS
ON FOR 15 SECS
TESTING
TESTING
IS BATTERY
CHARGED?
YES/NO
GOOD & PASS
VOL: xx.xx V
CCA: xxxx CCA/SAE
xx.xx mΩ
IR:
GOOD &
RECHARGE
VOL: xx.xx V
CCA: xxxx CCA/SAE
xx.xx mΩ
IR:
9