1. Manuels
  2. Marques
  3. Lifetime Manuels
  4. Rangement extérieur
  5. 60138
  6. Instructions d'assemblage

Lifetime 60138 Instructions D'assemblage

De 4,6 x 2,4 m
Masquer les pouces
Table des Matières

Publicité

Liens rapides

Télécharger ce manuel
15' x 8'
OUTDOOR STORAGE SHED
MODEL 60138
BEFORE ASSEMBLY:
• Assemble on a level surface
• At least 3 people recommended for setup
ADDITIONAL ASSEMBLY HELP
For customer service in the United Kingdom and mainland europe:
Email: service@lifetimeproducts.eu
FOR DOMESTIC USE ONLY!
IMPORTANT: RETAIN FOR FUTURE REFERENCE. READ CAREFULLY.
TOOLS REQUIRED
QUESTIONS?
CONTACT LIFETIME CUSTOMER SERVICE:
Call: 1-800-225-3865
7:00 am-5:00 pm (Monday-Friday) MST
and 9:00 am-1:00 pm Saturday MST
For assembly help, scan:
or search
1203132
in the BILT app.
Live Chat:
www.lifetime.com/customerservice
(click on the "LIVE CHAT" tab)
ASSEMBLY INSTRUCTIONS
Pour le français, voir la page 2. Para el español, ver la página 3.
TABLE OF CONTENTS
Icon Legend................................4
Warnings & Notices.....................5
Platform Construction.................6
Truss Assembly.........................11
Gable Assembly........................18
Door Assembly..........................22
Floor Assembly..........................35
Wall Assembly..........................39
Shelving Installation..................46
Parts Identifi er..........................49
Roof Assembly..........................53
3/8" (10 mm)
Window Installation...................77
Shutter Installation...................80
Wall Hook Installation................83
5/16" (8 mm)
Wood Drill Bit
Door Alignment.........................88
Anchoring................................90
Cleaning & Care.........................95
5/16" (8 mm)
Registration...........................96
Masonry Drill Bit
Warranty................................97
MODEL# AND PRODUCT ID
Model Number: 60138
Product ID:
(both are needed when contacting us)

Publicité

Table des Matières
loading

Manuels Connexes pour Lifetime 60138

Sommaire des Matières pour Lifetime 60138

  • Page 1: Table Des Matières

    Anchoring........90 Cleaning & Care......95 5/16" (8 mm) Registration......96 Masonry Drill Bit Warranty........97 QUESTIONS? CONTACT LIFETIME CUSTOMER SERVICE: MODEL# AND PRODUCT ID Call: 1-800-225-3865 Live Chat: www.lifetime.com/customerservice (both are needed when contacting us) (click on the “LIVE CHAT” tab) Model Number: 60138 7:00 am–5:00 pm (Monday–Friday) MST...

  • Page 2: Instructions D'assemblage

    Foret à maçonnerie Nettoyage et entretien....95 Enregistrement......96 Garantie.......98 ® QUESTIONS ? CONTACTER LES SERVICES À LA CLIENTÈLE LIFETIME Composer le 1-800-225-3865 t’Chat en direct: N° DE MODÈLE ET RÉFÉRENCE DU PRODUIT www.lifetime.com/customerservice (il faut avoir les deux en entrant contact avec nous) (cliquer sur la languette «...

  • Page 3: Instrucciones De Ensamble

    Broca de albañilería Limpieza y cuidado......95 Registro........96 Garantía.......99 ¿PREGUNTAS? ® PONERSE EN CONTACTO CON LOS SERVICIOS DE CLIENTES LIFETIME Chat en vivo: MODEL E ID DEL PRODUCTO Marcar: 1-800-225-3865 www.lifetime.com/customerservice (se necesitan los dos al contactarnos) (cliquear en la lengüeta «LIVE CHAT») Número de modelo: 60138...

  • Page 4: Icon Legend

    ICON LEGEND / LÉGENDE DES ICÔNES / LEYENDA DE ÍCONOS • Indicates special heed should be taken when reading. • Indique qu’une attention spéciale doit être portée à la lecture. • Indica que uno debe prestar atención al leer. • Indicates the parts to be used for a section. •...

  • Page 5: Warnings & Notices

    WARNINGS & NOTICES / AVERTISSEMENTS ET AVIS / ADVERTENCIAS Y AVISOS English: • Failure to follow these warnings may result in serious injury or property damage and will void warranty. • To ensure safety, do not attempt to assemble this product without following the instructions carefully. •...

  • Page 6: Platform Construction

    PLATFORM CONSTRUCTION / CONSTRUCTION DE LA PLATE-FORME / CONSTRUCCIÓN DE LA PLATAFORMA • You must provide a platform on which to assemble your shed. Proper building permit documentation may be required in your neighborhood. Consult all local building codes prior to assembling the shed. Before beginning assembly, you must pour or construct a platform.
  • Page 7 SECTION 1 (CONTINUED) / SECTION 1 (SUITE) SECCIÓN 1 (CONTINUACIÓN) CONCRETE REQUIRED / BÉTON REQUIS CONCRETO REQUERIDO 2 yd (1,53 m CONCRETE PLATFORM / PLATE-FORME EN BÉTON PLATAFORMA DE CONCRETO • The concrete should be approximately 4" (10,2 cm) thick. The actual dimensions of the shed, at its widest and longest points, are 180"...
  • Page 8 SECTION 1 (CONTINUED) / SECTION 1 (SUITE) SECCIÓN 1 (CONTINUACIÓN) WOOD REQUIRED / BOIS REQUIS MADERA REQUERIDA WOOD PLATFORM / PLATE-FORME EN BOIS PLATAFORMA DE MADERA • The actual dimensions of the shed, at its widest and longest points, are 180" x 96" (4,57 m x 2,44 m). Ensure you select a site that will accommodate these measurements.
  • Page 9 SECTION 1 (CONTINUED) / SECTION 1 (SUITE) SECCIÓN 1 (CONTINUACIÓN) WOOD REQUIRED / BOIS REQUIS MADERA REQUERIDA 2 in/po x 4 in/po x 178 in/po (5,1 cm x 10,2 cm x 4,52 m) (x2) 2 in/po x 4 in/po x 90 1/2 in/po (5,1 cm x 10,2 cm x 2,30 m) (x13) 16d 3 in/po (16d x 7,62 cm) (x52) 1.2.1 •...
  • Page 10 SECTION 1 (CONTINUED) / SECTION 1 (SUITE) SECCIÓN 1 (CONTINUACIÓN) WOOD REQUIRED / BOIS REQUIS MADERA REQUERIDA 34 in/po x 93 1/2 in/po x 3/4 in/po (86,4 cm x 2,38 m x 19,1 mm) (x1) 48 in/po x 93 1/2 in/po x 3/4 in/po (1,22 m x 2,38 m x 19,1 mm) (x3) 8d 1 1/2 in/po (8d 3,81 cm) (x72) 3/8 in/po (10 mm)

  • Page 11: Truss Assembly

    TRUSS ASSEMBLY / ASSEMBLAGE DES FERMES / ENSAMBLE DE LAS CERCHAS HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO Hardware Bag / Sac de quincaillerie Bolsa de herraje CXK (x2) DTK (x22) ADY (x19) ADK (x40) ADJ (10) AHT (x1) DTJ (x1) 11 9/16 in/po (29,4 cm) ADH (x5)

  • Page 12: Outils Et Quincaillerie Requis

    SECTION 2 (CONTINUED) / SECTION 2 (SUITE) SECCIÓN 2 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 3/8 in/po (x2) (10 mm) (x2) ADK (x8) DTK (x8) SIDE TRUSSES (x2) / FERMES LATÉRALES (x2) CERCHAS LATERALES (x2) •...
  • Page 13 SECTION 2 (CONTINUED) / SECTION 2 (SUITE) SECCIÓN 2 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 3/8 in/po (10 mm) ADY (x8) ADK (x8) 7/16 in/po (x2) (11 mm) (x2) 11 9/16 in/po (29,4 cm) ADH (x2) ADJ (x4) ADY (x2)
  • Page 14 SECTION 2 (CONTINUED) / SECTION 2 (SUITE) SECCIÓN 2 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADJ (x4) 7/16 in/po (x2) (11 mm) (x2) DTK (x8) 3/8 in/po (x2) (10 mm) (x2) ADY (x8) 11 9/16 in/po (29,4 cm) ADK (x16) ADH (x2)
  • Page 15 SECTION 2 (CONTINUED) / SECTION 2 (SUITE) SECCIÓN 2 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 3/8 in/po (x2) (10 mm) (x2) DTK (x4) ADK (x6) ADY (x2) DTK (x4) • Attach a Connector (AIP) to the end of two Truss Gutter Channels using the hardware provided.
  • Page 16 SECTION 2 (CONTINUED) / SECTION 2 (SUITE) SECCIÓN 2 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 3/8 in/po (x2) (10 mm) (x2) DTK (x2) ADK (x1) DTJ (x1) CXK (x2) 2.11 • Attach the Vertical Truss Brace (DSN) to the Truss. Only fi nger tighten this Nut (ADK) for now. •...
  • Page 17 SECTION 2 (CONTINUED) / SECTION 2 (SUITE) SECCIÓN 2 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 7/16 in/po (x2) (11 mm) (x2) ADJ (x2) 3/8 in/po (x2) AHT (x1) (10 mm) (x2) 11 9/16 in/po (29,4 cm) ADH (x1) ADK (x1) ADY (x1)

  • Page 18: Gable Assembly

    GABLE ASSEMBLY / ASSEMBLAGE DES PIGNONS / ENSAMBLE DE LAS FACHADAS HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO Hardware Bag / Sac de quincaillerie Bolsa de herraje ADW (x10) ADZ (x8) AEE (x10) AGP (x2) AIQ (x2) ADV (x4) AHS (x2) PARTS REQUIRED / PIÈCES REQUISES / PIEZAS REQUERIDAS Metal Parts /...

  • Page 19: Tools And Parts Required

    • Si tiene problemas con esta sección, siga el código debajo izquierda(AGH) y derecha (AGI). para ver un video sobre el ensamble en esta sección. http://go.lifetime.com/gableassem10x8 • Place the Screen (AIQ) over the Vent (AGP) and align • Secure the two Gable Halves with four (4) Screws the fi...
  • Page 20 SECTION 3 (CONTINUED) / SECTION 3 (SUITE) SECCIÓN 3 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET PIÈCES REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS AEE (x10) ADW (x10) AHS (x2) • Repeat the previous steps for the second Vent. • Secure with the hardware provided. •...
  • Page 21 SECTION 3 (CONTINUED) / SECTION 3 (SUITE) SECCIÓN 3 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET PIÈCES REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADV (x4) • Align the holes in the Header with those in the Gable. Secure with the hardware provided. •...

  • Page 22: Door Assembly

    LEFT DOOR ASSEMBLY / ASSEMBLAGE DE LA PORTE GAUCHE / ENSAMBLE DE LA PUERTA IZQUIERDA HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO Hardware Bag / Sac de quincaillerie Bolsa de herraje ADJ (x2) AEE (x3) ADW (x1) AEB (x2) BYZ (x2) AHM (x2) ABU (x2)
  • Page 23 (BDJ). para ver un video sobre el ensamble en esta sección. http://go.lifetime.com/leftdoornewlatch • Door Channels (BLH) are bowed by design, ensuring a tight fi t when they are closed and latched, and making your shed more secure. These channels are formed with a slight bend to the adjoining door edge—like parentheses facing each other: ( ).
  • Page 24 SECTION 4 (CONTINUED) / SECTION 4 (SUITE) SECCIÓN 4 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET PIÈCES REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS BYR (x1) BYS (x1) • Set the Deadbolts (AHM) down into the recesses at the top and bottom of the Door. Then, slide the Door End Channel (BLH) over the edge of the Door and the bottom of the Deadbolts as shown.
  • Page 25 SECTION 4 (CONTINUED) / SECTION 4 (SUITE) SECCIÓN 4 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET PIÈCES REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 7/16 in/po BYZ (x2) (11 mm) ADW (x1) AEB (x2) AEE (x3) ADJ (x2) ECY (x1) ECX (x1) ABU (x2) •...
  • Page 26 SECTION 4 (CONTINUED) / SECTION 4 (SUITE) SECCIÓN 4 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET PIÈCES REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x28) • Peel off the protective backing from both sides of Window Pane (DHN). Align the holes in the Pane with those in the Door, and gently set a Window Pane down onto the Door.
  • Page 27 RIGHT DOOR ASSEMBLY / ASSEMBLAGE DE LA PORTE DROITE / ENSAMBLE DE LA PUERTA DERECHA HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO Hardware Bag / Sac de quincaillerie Bolsa de herraje ADW (x1) AEE (x1) BYS (x1) BYR (x1) BBI (x1) ABU (x2) ECW (x1)
  • Page 28 • Si tiene problemas con esta sección, siga el código debajo para ver un video sobre el ensamble en esta sección. http://go.lifetime.com/rightdoorslidelatch • Door Channels (BLH) are bowed by design, ensuring a tight fi t when they are closed and latched, making your shed more secure. These channels are formed with a slight bend to the adjoining door edge—like parentheses facing each other: ( ).
  • Page 29 SECTION 5 (CONTINUED) / SECTION 5 (SUITE) SECCIÓN 5 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET PIÈCES REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 7/16 in/po BYZ (x2) (11 mm) AEE (x1) BBI (x1) ADJ (x2) ADW (x1) AEB (x2) ECW (x1) ABU (x2) ECZ (x1) EDA (x1)
  • Page 30 SECTION 5 (CONTINUED) / SECTION 5 (SUITE) SECCIÓN 5 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET PIÈCES REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x28) • Peel off the protective backing from both sides of Window Pane (DHN). Align the holes in the Pane with those in the Door, and gently set a Window Pane down onto the Door.

  • Page 31: Domed Skylight Assembly

    DOMED SKYLIGHT ASSEMBLY / ASSEMBLAGE DES LUCARNES EN FORME DE DÔME / ENSEMBLE DE LOS TRAGALUCES EN FORMA DE CÚPULA HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO Hardware Bag / Sac de quincaillerie Bolsa de herraje EFA (x24) AEE (x48) AHI (x2) ADK (x24) PARTS REQUIRED / PIÈCES REQUISES / PIEZAS REQUERIDAS...

  • Page 32: Outils Et Quincaillerie Requis

    • Lay the Butyl Tape (AHI) over the groove along the top edge of the opening in the Roof Panel, and cut it. Peel back the paper backing a bit, and continue laying the Butyl Tape along the groove being sure to slightly overlap the ends.
  • Page 33 SECTION 6 (CONTINUED) / SECTION 6 (SUITE) SECCIÓN 6 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS • Run your thumb along the Butyl Tape to remove any bubbles. Then, completely remove the paper backing. •...
  • Page 34 SECTION 6 (CONTINUED) / SECTION 6 (SUITE) SECCIÓN 6 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 3/8 in/po (10 mm) ADK (x24) AEE (x48) EFA (x24) • Remove the protective plastic from both sides of the Skylight (AGB). Align the holes in the Domed Skylight with those in the Roof Panel, and insert the Screws (EFA).

  • Page 35: Floor Assembly

    FLOOR ASSEMBLY / ASSEMBLAGE DU PLANCHER / ENSAMBLE DEL PISO HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO Hardware Bag / Sac de quincaillerie Bolsa de herraje ADC (x1) AHO (x2) BQC (x30) Note: These are not anchoring screws. Their purpose is to fasten together the Floor Panels. Remarque : Ces vis ne sont pas de vis d’ancrage.
  • Page 36 SECTION 7 (CONTINUED) / SECTION 7 (SUITE) SECCIÓN 7 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET PIÈCES REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS • Hold an Inner Floor Panel (CUD) at an angle and slide the tabs along the edge underneath an Outer Floor Panel (CUW).
  • Page 37 SECTION 7 (CONTINUED) / SECTION 7 (SUITE) SECCIÓN 7 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET PIÈCES REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS AHO (x2) • Repeat the last step. • Attach an Outer Floor Panel (CUW) to the Inner Floor •...
  • Page 38 SECTION 7 (CONTINUED) / SECTION 7 (SUITE) SECCIÓN 7 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET PIÈCES REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS BQC (x30) • Insert the Screws (BQC) through the divots in the Floor Panels and into the tabs of the adjacent Floor Panels. (The divots are near the seams of the Floor Panels.) •...

  • Page 39: Wall Assembly

    WALL ASSEMBLY / ASSEMBLAGE DES MURS / ENSAMBLE DE LOS MUROS HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO Hardware Bag / Sac de quincaillerie Bolsa de herraje ADZ (x142) PARTS REQUIRED / PIÈCES REQUISES / PIEZAS REQUERIDAS Metal Parts / Pièces en métal Piezas de metal 67 3/4 in/po (1,72 m)

  • Page 40: Tools And Parts Required

    SECTION 8 (CONTINUED) / SECTION 8 (SUITE) SECCIÓN 8 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET PIÈCES REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x44) • Secure a Wall Support Channel (AFM) to the center groove of each of the nine (9) Wall Panels (AHD) using four (4) Screws (ADZ) for each.
  • Page 41 SECTION 8 (CONTINUED) / SECTION 8 (SUITE) SECCIÓN 8 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET PIÈCES REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x16) • Secure a Wall Support Channel (AFM) to the Left • Secure a Wall Support Channel (AFM) to the two (2) Narrow Wall Panel (CKK) using four (4) Screws (ADZ).
  • Page 42 SECTION 8 (CONTINUED) / SECTION 8 (SUITE) SECCIÓN 8 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET PIÈCES REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS AIW (x1) ADZ (x5) • Insert the two tabs at the bottom of the Narrow • Slide the Panel to the left. Wall Panel (CKK) into the 7th and 8th slots from the •...
  • Page 43 SECTION 8 (CONTINUED) / SECTION 8 (SUITE) SECCIÓN 8 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET PIÈCES REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS AIW (x1) ADZ (x5) 8.10 8.11 • Insert the two rear-most tabs at the bottom of • Slide the Panel to the front of the Floor as far as the Front, Right Corner Wall Panel (AGW) in the fi...
  • Page 44 SECTION 8 (CONTINUED) / SECTION 8 (SUITE) SECCIÓN 8 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET PIÈCES REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS AIW (x1) ADZ (x40) 8.13 • Insert the four tabs at the bottom of two (2) Wall Panels (AHD) into the next four slots along the edge of the Floor, and slide the Panel forward.
  • Page 45 SECTION 8 (CONTINUED) / SECTION 8 (SUITE) SECCIÓN 8 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET PIÈCES REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS AIW (x1) ADZ (x30) 8.16 8.17 • Insert this Corner Wall Panel (AGW) in the same way •...

  • Page 46: Shelving Installation

    SHELVING INSTALLATION / INSTALLATION DU RAYONNAGE / INSTALACIÓN DE LA ESTANTERÍA HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO Hardware Bag / Sac de quincaillerie Bolsa de herraje AIY (x2) ADZ (x28) PARTS REQUIRED / PIÈCES REQUISES / PIEZAS REQUERIDAS Plastic Parts / Pièces en plastique Piezas de plástico...
  • Page 47 SECTION 9 (CONTINUED) / SECTION 9 (SUITE) SECCIÓN 9 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET PIÈCES REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x8) • Choose how high you would like the Long Shelf to be by selecting the corresponding notches in the Wall Support Channels (there are fi...
  • Page 48 SECTION 9 (CONTINUED) / SECTION 9 (SUITE) SECCIÓN 9 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET PIÈCES REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x6) • Set the Shelf down onto the Brackets. • Attach the Shelf to the Corner Panels using two •...

  • Page 49: Parts Identifi Er

    PARTS IDENTIFIER / IDENTIFICATEUR DE PIÈCES / IDENTIFICADOR DE PIEZAS CONTENTS OF BOX 1 / CONTENU DE LA BOÎTE 1 CONTENIDO DE LA CAJA 1 BDJ (x1) BDK (x1) AGH (x2) AGI (x2) BDC (x1) AGQ (x6) CUW (x2) DRA (x1) CUD (x2) 45 1/2 in/po (1,16 m) CVC (x2)
  • Page 50 PARTS IDENTIFIER / IDENTIFICATEUR DE PIÈCES / IDENTIFICADOR DE PIEZAS METAL PARTS KIT 1 / KIT PIÈCES EN MÉTAL 1 KIT DE PIEZAS DE METAL 1 34 1/8 in/po (86,7 cm) DSO (x1) 74 1/2 in/po (1,89 m) CRE (x2) 75 1/2 in/po (1,92 m) BLH (x2) 58 1/4 in/po (1,47 m)
  • Page 51 PARTS IDENTIFIER / IDENTIFICATEUR DE PIÈCES / IDENTIFICADOR DE PIEZAS CONTENTS OF BOX 2 / CONTENU DE LA BOÎTE 2 CONTENIDO DE LA CAJA 2 AGW (x2) AGL (x2) AHD (x5) AHH (x2) CKK (x1) CKN (x1) CONTENTS OF SMALL PARTS BOX / CONTENU DE LA BOÎTE DE PETITES PIÈCES CONTENIDO DE LA CAJA DE PIEZAS PEQUEÑAS AFL (x12)
  • Page 52 PARTS IDENTIFIER / IDENTIFICATEUR DE PIÈCES / IDENTIFICADOR DE PIEZAS CONTENTS OF BOX 2 / CONTENU DE LA BOÎTE 2 CONTENIDO DE LA CAJA 2 HARDWARE BAGS / SACS DE QUINCAILLERIE BOLSAS DE HERRAJE EDM ECT CONTENTS OF BOX 3 / CONTENU DE LA BOÎTE 3 CONTENIDO DE LA CAJA 3 CUD (x2)

  • Page 53: Roof Assembly

    ROOF ASSEMBLY / ASSEMBLAGE DU TOIT / ENSAMBLE DEL TEJADO HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO Hardware Bag / Sac de quincaillerie Bolsa de herraje ADZ (x240) DTV (x2) CWU (x24) AXX (x4) AHP (x2) AEE (x2) CXK (x2) CUZ (x4) BHJ (x2) (Not Used /...
  • Page 54 ROOF ASSEMBLY / ASSEMBLAGE DU TOIT / ENSAMBLE DEL TEJADO PARTS REQUIRED / PIÈCES REQUISES / PIEZAS REQUERIDAS Plastic Parts / Pièces en plastique Piezas de plástico (x1) (x2) BDJ (x1) BDK (x1) 45 1/2 in/po (1,16 m) CVC (x2) 45 1/2 in/po (1,16 m) CVE (x2) BDR (x1)
  • Page 55 SECTION 10 (CONTINUED) / SECTION 10 (SUITE) SECCIÓN 10 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET PIÈCES REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS CWU (x24) 10.1 • Attach a Corner Trim (CVG) to each corner with six (6) Screws (CWU)—two at the top, two in the middle, and two at the bottom.
  • Page 56 SECTION 10 (CONTINUED) / SECTION 10 (SUITE) SECCIÓN 10 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET PIÈCES REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x14) 10.2 • Attach a Side Gable to the Shed using fourteen (14) Screws (ADZ). • Attachez un pignon latéral à l’abri à l’aide de quatorze (14) vis (ADZ). •...
  • Page 57 SECTION 10 (CONTINUED) / SECTION 10 (SUITE) SECCIÓN 10 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET PIÈCES REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x4) 10.4 • Set the Roof Panel (AGQ) down onto the Wall Panel, Gable, and Truss. The groove at the bottom of the Roof Panel sets over the top of the Wall Panel.
  • Page 58 SECTION 10 (CONTINUED) / SECTION 10 (SUITE) SECCIÓN 10 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET PIÈCES REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x7) 10.6 • Insert the fi rst three (3) Screws (ADZ) through the Gable and the fi rst two (2) Screws (ADZ) through the Truss and into the Roof Panel at the locations shown.
  • Page 59 SECTION 10 (CONTINUED) / SECTION 10 (SUITE) SECCIÓN 10 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET PIÈCES REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x11) 10.8 • Repeat these steps for the rear Roof Panel, but only use one Roof Support for each Roof Panel (AGQ). •...
  • Page 60 SECTION 10 (CONTINUED) / SECTION 10 (SUITE) SECCIÓN 10 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET PIÈCES REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x20) 10.10 • Attach these Roof Panels (AGQ) in a similar manner as the previous Panels. Roof Panels in these locations only use ten (10) Screws (ADZ) each.
  • Page 61 SECTION 10 (CONTINUED) / SECTION 10 (SUITE) SECCIÓN 10 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET PIÈCES REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x42) 10.11 • Repeat steps 10.2–10.10 for the Panels on the opposite side. • Répétez les étapes 10.2 – 10.10 pour les panneaux sur le côté opposé. •...
  • Page 62 SECTION 10 (CONTINUED) / SECTION 10 (SUITE) SECCIÓN 10 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET PIÈCES REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 10.12 • Place the back of the Center Truss into the notch on the center rear Wall Panel. Then, lift the front of the Truss up so the ends of the Roof Support Tube touch the Side Trusses.
  • Page 63 SECTION 10 (CONTINUED) / SECTION 10 (SUITE) SECCIÓN 10 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET PIÈCES REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 3/8 in/po (10 mm) DTV (x2) AEE (x2) CXK (x2) 10.13 • Secure the ends of the Support Tube to the Side Truss Channels using the hardware provided. •...
  • Page 64 SECTION 10 (CONTINUED) / SECTION 10 (SUITE) SECCIÓN 10 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET PIÈCES REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS AHP (x1) 10.14 • Pull the Hinge Tube down out of the Left Door (the Door without the notched corner) about six inches. Align the hole at the bottom of the Hinge Tube with the slit in the Bushing, and insert the Tube.
  • Page 65 SECTION 10 (CONTINUED) / SECTION 10 (SUITE) SECCIÓN 10 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET PIÈCES REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS AHP (x1) 10.15 • Repeat the last step for the Right Door. • Répétez l’étape précédente pour la porte droite. •...
  • Page 66 SECTION 10 (CONTINUED) / SECTION 10 (SUITE) SECCIÓN 10 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET PIÈCES REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x21) 10.17 • Set the end of the Center Truss onto the notch in the Front Gable as shown. •...
  • Page 67 SECTION 10 (CONTINUED) / SECTION 10 (SUITE) SECCIÓN 10 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET PIÈCES REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 3/8 in/po (10 mm) ECS (x1) BZA (x2) ADK (x2) AEE (x4) 10.19 ECR (x1) • Insert the Right Drainage Plate (ECS) into the Right Lateral Truss, and align the notch in the Plate with the fi rst hole in the Truss as shown.
  • Page 68 SECTION 10 (CONTINUED) / SECTION 10 (SUITE) SECCIÓN 10 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET PIÈCES REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 3/8 in/po (10 mm) ADZ (x14) 10.21 • Fold the ends of the Large Angled Roof Panel (DRA) and set it down onto the shed as shown. Secure the Panel to the Entry Gable and Center Truss with twelve (12) Screws (ADZ) at the locations shown.
  • Page 69 SECTION 10 (CONTINUED) / SECTION 10 (SUITE) SECCIÓN 10 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET PIÈCES REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x20) 10.23 • An adult must apply a downward pressure on Panel (DRB) while another inserts these Screws (ADZ). •...
  • Page 70 SECTION 10 (CONTINUED) / SECTION 10 (SUITE) SECCIÓN 10 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET PIÈCES REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 10.25 • Insert the two Center Roof Extension Panels (CVD) into the Skylight Connector (CVF) as shown. Repeat this step 2 times (for a total of 3).
  • Page 71 SECTION 10 (CONTINUED) / SECTION 10 (SUITE) SECCIÓN 10 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET PIÈCES REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x4) 10.27 • Secure the Skylights to the Extensions at the four points shown. • Attachez les lucarnes aux panneaux supplémentaires aux quatre points indiqués.
  • Page 72 SECTION 10 (CONTINUED) / SECTION 10 (SUITE) SECCIÓN 10 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET PIÈCES REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x12) 10.29 • Secure with six (6) Screws (ADZ) at the locations shown. • Attachez-les à l’aide de six (6) vis (ADZ) aux emplacements indiqués. •...
  • Page 73 SECTION 10 (CONTINUED) / SECTION 10 (SUITE) SECCIÓN 10 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET PIÈCES REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x28) 10.32 • Secure the Long Roof Extensions to the Skylight Assembly using fourteen (14) Screws (ADZ). •...
  • Page 74 SECTION 10 (CONTINUED) / SECTION 10 (SUITE) SECCIÓN 10 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET PIÈCES REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x20) 10.34 • Set the three Skylight Connectors down inside the three center Trusses. The center Skylight Connector should be inside the center Truss.
  • Page 75 SECTION 10 (CONTINUED) / SECTION 10 (SUITE) SECCIÓN 10 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET PIÈCES REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x16) 10.35 • Connect the Roof Panel Enxtensions to the Roof Panels and Gables at the locations shown. •...
  • Page 76 SECTION 10 (CONTINUED) / SECTION 10 (SUITE) SECCIÓN 10 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET PIÈCES REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS CUZ (x4) ADZ (x4) AXX (x4) 10.36 • Attach an End Cap (CVB) at each end, and secure at the locations shown. •...

  • Page 77: Window Installation

    WINDOW PANE INSTALLATION / INSTALLATION DES CARREAUX / INSTALACIÓN DE LAS HOJAS DE VENTANA HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO Hardware Bags / Sacs de quincaillerie Bolsas de herraje ADY (x2) ADZ (x8) AIS (x4) PARTS REQUIRED / PIÈCES REQUISES / PIEZAS REQUERIDAS Plastic Parts / Pièces en plastique Piezas de plástico...
  • Page 78 (AHE). Con el borde curvado hacia arriba y el interior, deslice la hoja en su lugar. http://go.lifetime.com/8wininstall 11.2 • Insert a Screw (ADY) into the hole at the bottom of the Window Pane. This helps keep the Window Pane up when open.
  • Page 79 SECTION 11 (CONTINUED) / SECTION 11 (SUITE) SECCIÓN 11 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET PIÈCES REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x8) AIS (x4) 11.3 • Attach the two (2) Window Latches (ADY) at the top corners of the Panel opening. The Latch should move freely. Repeat steps 11.1–11.3 for the second Window Pane.

  • Page 80: Shutter Installation

    SHUTTER INSTALLATION / INSTALLATION DES VOLETS / INSTALACIÓN DE LAS CONTRAVENTANAS HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO Hardware Bags / Sacs de quincaillerie Bolsas de herraje ARV (x16) PARTS REQUIRED / PIÈCES REQUISES / PIEZAS REQUERIDAS Plastic Parts / Pièces en plastique Piezas de plástico AYI (x4)
  • Page 81 SECTION 12 (CONTINUED) / SECTION 12 (SUITE) SECCIÓN 12 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET PIÈCES REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ARV (x1) 12.1 • There are four sets of two screw-location indicators. One by one, insert the Screws (ARV) through the indicators from the inside of the shed outward, and attach the Shutters (AYI) to the outside of the Wall Panels.
  • Page 82 SECTION 12 (CONTINUED) / SECTION 12 (SUITE) SECCIÓN 12 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET PIÈCES REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ARV (x7) 12.2 • Align the screw bosses in the Shutters (AYI) with the Screws (ARV) as you insert the Screws. Secure both Shutters to the Panels.

  • Page 83: Wall Hook Installation

    WALL HOOK INSTALLATION / INSTALLATION DES CROCHETS / INSTALACIÓN DE LOS GANCHOS HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO Hardware Bags / Sacs de quincaillerie Bolsas de herraje ADZ (x7) EDL (x12) PARTS REQUIRED / PIÈCES REQUISES / PIEZAS REQUERIDAS Large Part / Grande pièce Pieza grande...

  • Page 84: Outils Et Quincaillerie Requis

    (7) para ver un video sobre el ensamble en esta sección. tornillos (ADZ). http://go.lifetime.com/doorbaghooks 13.2 • Insert the twelve (12) Wall Hooks (EDL) into any of the notches in the Wall Panels (either side of the shed). Then push downward to lock them in place.

  • Page 85: Heavy Load Kit Installation

    HEAVY LOAD KIT INSTALLATION / INSTALLATION DU KIT POUR LA CHARGE LOURDE / INSTALACIÓN DEL KIT PARA LA CARGA PESADA HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO Hardware Bag / Sac de quincaillerie Bolsa de herraje BRK (x20) PARTS REQUIRED / PIÈCES REQUISES / PIEZAS REQUERIDAS Metal Parts / Pièces en métal Piezas de metal...
  • Page 86 SECTION 14 (CONTINUED) / SECTION 14 (SUITE) SECCIÓN 14 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS BRK (x12) 14.1 • Set a Gusset (EGQ) up against the rear of the Center Truss as shown. Using an electric Drill, insert six (6) Screws (BRK).
  • Page 87 SECTION 14 (CONTINUED) / SECTION 14 (SUITE) SECCIÓN 14 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS BRK (x8) 14.2 • Place the Left Gable support (EGR) up fl ush against the Gable and Roof as shown. Secure with two (2) Self-Tapping Screws (BRK) to the Center Truss.

  • Page 88: Door Alignment

    DOOR ALIGNMENT / ALIGNEMENT DES PORTES / ALINEACIÓN DE LAS PUERTAS HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO PARTS REQUIRED / PIÈCES REQUISES / PIEZAS REQUERIDAS Plastic Parts / Pièces en plastique Piezas de plástico AIX (x4) TOOLS REQUIRED / OUTILS REQUIS / INSTRUMENTAL REQUERIDO 88 88...
  • Page 89 SECTION 15 (CONTINUED) / SECTION 15 (SUITE) SECCIÓN 15 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS AIX (x4) 15.1 • If one or both of the Doors scrape the fl oor when closing or are not aligned at the top, follow these steps to correct them: •...

  • Page 90: Anchoring

    SHED ANCHORING / ANCRAGE DE L’ABRI / ANCLAJE DE LA CASETA HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO NO HARDWARE OR PARTS INCLUDED FOR THIS SECTION AUCUNE QUINCAILLERIE OU PIÈCE INCLUSE POUR CETTE SECTION NINGÚN HERRAJE O PIEZA INCLUIDO PARA ESTA SECCIÓN PARTS REQUIRED / PIÈCES REQUISES / PIEZAS REQUERIDAS NO HARDWARE OR PARTS INCLUDED FOR THIS SECTION AUCUNE QUINCAILLERIE OU PIÈCE INCLUSE POUR CETTE SECTION...

  • Page 91: Pour Une Plate-Forme En Béton

    SECTION 16 (CONTINUED) / SECTION 16 (SUITE) SECCIÓN 16 (CONTINUACIÓN) FOR A CONCRETE PLATFORM / POUR UNE PLATE-FORME EN BÉTON PARA UNA PLATAFORMA DE CONCRETO 5/16 in/po (8 mm) 16.1 • If you plan on anchoring your shed to a concrete platform, you must purchase the correct anchoring hardware. We recommend using a hammer drill, 5/16"...
  • Page 92 SECTION 16 (CONTINUED) / SECTION 16 (SUITE) SECCIÓN 16 (CONTINUACIÓN) FOR A CONCRETE PLATFORM / POUR UNE PLATE-FORME EN BÉTON PARA UNA PLATAFORMA DE CONCRETO 5/16 in/po (8 mm) 7/16 in/po (11 mm) 16.1 • If you plan on anchoring your shed to a wood platform, you must purchase the correct anchoring hardware. We recommend using a drill, 5/16"...
  • Page 93 NOTES / REMARQUES / NOTAS 93 93...
  • Page 94 NOTES / REMARQUES / NOTAS 94 94...

  • Page 95: Cleaning & Care

    CLEANING & CARE Congratulations on your Lifetime product purchase. By following the instructions below, your new Lifetime product should provide you with years ® of service and enjoyment. The polyethylene panels are stain and solvent resistant. Most stains can be removed using a mild soap and a soft-bristled brush.

  • Page 96: Registration

    REGISTER today! ENREGISTRER CE PRODUIT EN LIGNE À WWW.LIFETIME.COM Chez Lifetime®, nous nous engageons à fournir des produits innovateurs de qualité. Lors de votre inscription, vous aurez l’occasion de nous faire parvenir vos commentaires. Votre opinion est importante pour nous.

  • Page 97: Warranty

    All merchandise is sold on this condition, and no representative of the company may waive or change this policy. 5. This product is not intended for institutional or commercial use; Lifetime Products, Inc. does not assume any liability for such use. Institutional or commercial use will void the warranty.

  • Page 98: Garantie De Fabrication Limitée De 10 Ans

    2. Cette garantie n’est pas transférable et est expressément limitée à la réparation ou au remplacement du produit défectueux. Si le produit est déclaré défectueux selon les termes de cette garantie, Lifetime © Products, Inc. réparera ou remplacera les parties défectueuses gratuitement pour l’acheteur.

  • Page 99: Garantía

    NO ESTÁN DISPONIBLES O SON OBSOLETAS. 1. El comprador original recibe la garantía de que las casetas Lifetime estarán libres de defectos de material o de mano de obra por un período de 10 años a contar desde la fecha de la compra original. La palabra “defectos” se defi ne como imperfecciones que perjudican el uso del producto.

  • Page 100: Améliorer L'achat Lifetime

    Or call: 1-800-424-3865 7:00 am–5:00 pm (M–F) MST and 9:00 am–1:00 pm Saturday MST ® AMÉLIORER L’ACHAT LIFETIME EN AJOUTANT DES ACCESSOIRES OU D’AUTRES PRODUITS Pour acheter des accessoires ou des autres produits Lifetime , visiter le : ® www.lifetime.com (Anglais seulement) Ou composer le 1-800-424-3865 Du lundi au vendredi de 7 h à...

Table des Matières