Communicating
Making a call
manually
Use the phone keypad to dial the
number. Your call will be connected
automatically in hands-free mode. Key-
pad buttons A-fig. 1 and B-fig. 1 are
the tools for making and receiving calls.
Making a call using the voice
recognition
Press button A-fig. 1 on the keypad
and wait for the tone. Then say the
name of the person you want to call.
To redial last number called
Press button A-fig. 1 on the keypad
and keep it pressed up to redialling of
the number.
Answering a call
Press button A-fig. 1 on the keypad.
Refusing a call
Press button B-fig. 1 on the keypad.
Dual call
– Press the keypad button B-fig. 1
to refuse the new call.
– Press the keypad button A-fig. 1
once to communicate with new caller.
– Press button A-fig. 1 once again to
return to your first caller.
– Press button B-fig. 1 once to end
the communication.
Adjusting the volume
Use the keys of the handset to adjust
the volume of the conversation.
Conversation in "confidential"
mode
Press the keypad button A-
fig. 1 briefly to switch the conversa-
tion to hands-free or handset mode.
It is also possible to activate the
"confidential" mode directly from the
telephone set: see telephone set man-
ual.
Clearing the memory
Press and hold pressed simultane-
ously both buttons A and B-fig. 1 on
the keypad.
IMPORTANT Clearing the mem-
ory will disconnect all stored phones,
will clear any phone number stored in
the system memory and will require
to repeat the pairing phase.
NOKIA 3650, 3660, N-GAGE,
6600 AND SIEMENS SX1
PHONES
IMPORTANT After getting into
the car and turning the ignition key to
MAR, your phone should ask you
whether to establish the connection.
If you want to, you can disable this
function. To do that, go into the phone
menu and select the Bluetooth
tion and then "Linked equipment"; se-
lect the system name, "Options" and
then "Def. as authorised".
IMPORTANT You can select the
required hands-free kit system settings
from the accessories menu.
®
op-
31