Technical Parameters - Orbegozo EX 3050 Manuel D'instructions

EX 3050
TROUBLE SHOOTING
Symptom
Carafe leakage water or water
leaks out from lid of carafe
Water leaks from the bottom of
coffee maker.
Water leaks out of outer side of
filter.
Acid (vinegar) taste exists in
Espresso coffee.
The coffee maker cannot work
anymore.
The steam cannot froth.
Do not take apart the appliance by yourself if the cause of failure is not found, you had better
contact certified serving centre.

TECHNICAL PARAMETERS

Model: EX 3050
Power: 850W
Voltage: 220 – 240 V ~ 50Hz
Cause
The carafe is not located
properly
The level of water in the tank
exceeds the scale of MAX.
There is much water in the drip
tray.
The coffee maker is malfunction.
There is some coffee powder on
filter edge.
No clean correctly after cleaning
mineral deposits.
The coffee powder is stored in a
hot, wet place for a long time.
The coffee powder turns bad.
The power outlet is not plugged
well.
The steam ready indicator is not
illuminated.
The container is too big or the
shape is not fit.
You have used skimmed milk
Corrections
Let centreline of carafe aligns
with leakage opening of brew
basket well.
The water level in the tank
should be within the scale of
MIN and MAX.
Please clean the drip tray.
Please contact with the
authorized service facility for
repairing.
Get rid of them.
Follow all steps shown on
"cleaning mineral deposits".
Please use fresh coffee powder,
or store unused coffee powder
in a cool, dry place. After
opening a package of coffee
powder, reseal it tightly and
store it in a refrigerator to
maintain its freshness.
Plug the power cord into a wall
outlet correctly, if the appliance
still does not work, please
contact with the authorized
service facility for repairing.
Only after the steam ready
indicator is illuminated, the
steam can be used to froth.
Use high and narrow cup.
Use whole milk.
16