Blaupunkt HOS-X20 Manuel page 11

7. Event Playback
Important: For this feature to work it is mandatory to have a micro SD-card installed on the LampCam.
Refer to chapter "3.2. Micro SD Card installation".
Step 1:
On the LampCam list menu tap the config
LampCam icon and then tap the notepad icon from
the desired LampCam.
Step 2:
Select a starting and ending point for the LampCam
to search for video recordings. Then click "OK".
Step 3:
The LampCam will display all the video recordings
from the previous time range. Each video will
display the date and time from when the video was
recorded.
Step 4:
To download a video click the right download
icon from the desired video. The video would be
downloaded to your smartphone and could be
found in your smartphone gallery. A downloaded
video will be displayed with the name in red.
Step 5:
To watch the video without downloading it you can
click on the desired video and the video. Now the
video will be streamed to your smartphone.
Step 6:
To delete a video from the micro-SD card select the
pencil icon, then select the video and tap the trash
icon.
11