physionics EXBK01 Mode D'emploi Original page 30

COMPUTER OPERATING INSTRUCTIONS
SCAN
TIME
SPEED
DISTANCE
TOTAL DIST
PULSE
CALORIES
1. You will need one battery (provided) to operate the Computer.
2. To select the function you want, press the MODE button and then select the
function of choice from the table above.
3. To reset the Computer, hold down the MODE button for 5 seconds.
4. The Computer will automatically turn off after 4 minutes when the bike is not in
use. Press any key to restart.
5. To monitor your heart rate, place your thumbs on the heart rate sensor for a few
seconds and check the display.
6. To adjust the resistance, turn the tension control to the right (harder), or to the
left (easier) .
7. If there is an improper display on the Computer, please replace both batteries with
new ones at the same time.
8. To move the bike, hold onto the saddle support pole, lift and push forward.
EN
Scans all functions – TIME, SPEED, DISTANCE, TOTAL DIST,
PULSE, CALORIES
Displays work out time lapse while exercising
Displays the current speed
Displays the distance while exercising
Displays the total distance at the end of your workout
Displays your heart rate
Displays the calories you have burned
30