Step 4 - Install The Receiver - AEI Security DIGISENDER HQ2 Mode D'emploi

ENGLISH (EN)
DG258 - DigiSender® HQ2 - Twin Input 5.8GHz Wireless AV Sender

Step 4 - Install the Receiver

The Receiver will pick up the signals being sent by your Transmitter and output them to a connected
TV.
1.
Locate a vacant SCART socket on the back of
your receiving TV and insert the DigiSender®
SCART cable.
3.
Connect the Power Supply Unit (PSU) to the
socket labelled 'PSU' on the Receiver.
Page 08
All manuals and user guides at all-guides.com
2.
Ensure that the Audio/Video and Remote Relay
Channel switches on the back of the Receiver
are set to 1.
4.
Connect the Power Supply Unit (PSU) to an
available mains socket.
Please read this instruction manual carefully prior to installation