Step 2 - Install The Transmitter - AEI Security DIGISENDER HQ2 Mode D'emploi

Step 2 - Install the Transmitter

The Transmitter will send the audio and video from a connected source (your Satellite receiver or
DVD Player for example) to the Receiver, located in another room in your home.
1.
Connect DigiConnector™ 1 to your Satellite,
Cable or Freeview box. Use the SCART socket
labelled 'TV' or 'OUT'. Connect any existing
SCART lead into the rear of the DigiConnector™.
3.
Ensure that the Audio/Video and Remote Relay
Channel switches on the back of the Transmitter
are set to 1.
Please read this instruction manual carefully prior to installation
All manuals and user guides at all-guides.com
DG258 - DigiSender® HQ2 - Twin Input 5.8GHz Wireless AV Sender
2.
Connect DigiConnector™ 2 to your DVD Player,
HDD Recorder or VCR. Use the SCART socket
labelled 'TV' or 'OUT'. Connect any existing
SCART lead into the rear of the DigiConnector™.
4.
Connect the IR Emitter to the socket labelled 'IR'
on the back of the Transmitter. See Page 07 for
more information on installing the IR Systeme
Technik™.
ENGLISH (EN)
Page 05