Safety Instructions; Installation Environment - SamplexPower PST-300-12 Manuel Du Propriétaire

seCtIOn 1 |
The following safety symbols will be used in this manual to highlight safety
and information:
WARninG!
Indicates possibility of physical harm to the user in case of non-compliance.
!
cAUtion!
Indicates possibility of damage to the equipment in case of non-compliance.
i
inFo
Indicates useful supplemental information.
Please read these instructions before installing or operating the unit to prevent personal
injury or damage to the unit.
SAFetY inStRUctionS - GeneRAL
installation and wiring compliance
• Installation and wiring must comply with the Local and National Electrical Codes and
must be done by a certified electrician.
Preventing electrical shock
• Always connect the grounding connection on the unit to the appropriate grounding
system.
• Disassembly / repair should be carried out by qualified personnel only.
• Disconnect all AC and DC side connections before working on any circuits associated
with the unit. Turning the oN/off switch on the unit to off position may not entirely
remove dangerous voltages.
• Be careful when touching bare terminals of capacitors. The capacitors may retain high
lethal voltages even after the power has been removed. Discharge the capacitors
before working on the circuits.

installation environment

• The inverter should be installed indoor only in a well ventilated, cool, dry
environment
• Do not expose to moisture, rain, snow or liquids of any type.
• To reduce the risk of overheating and fire, do not obstruct the suction and discharge
openings of the cooling fans.
• To ensure proper ventilation, do not install in a low clearance compartment.

safety Instructions

SAMLEX AMERICA INC. | 3