USRobotics R24.0692.00 Guide D'installation Rapide page 9

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 17
Step Two: Configure the Basic Connection Settings
1. Start your Web browser.
2. In the location or address line, type
router configuration pages.
The router's default IP address is 192.168.2.1.
N o t e :
3. Click
. The Setup Wizard leads you through the basic router configuration proc-
Start
ess.
If you see a "Page Not Found" error at any time while using the router
N o t e :
configuration pages, press the
refresh the page.
The Setup Wizard will attempt to automatically detect your Internet connection. If
your connection cannot be automatically detected, you can manually enter your con-
nection information. If you are unsure about any required connection information,
contact your Internet Service Provider (ISP).
4. After the initial configuration, the router will reboot and you will be directed to the
page.
Status
5. If you will be connecting to your network via a wireless connection, you can unplug
the Ethernet cable from the router and your computer, install your wireless adapter,
and connect to your router. For instructions on installing your wireless adapter, see
your wireless adapter's documentation.
For expanded Setup Wizard details, see the User Guide on the USRobotics Installation CD-
ROM.
Point-to-Point Tunneling (PPTP) Users:
If your ISP uses a PPTP connection, you will need to perform the following addi-
tional steps to complete your Installation procedure and create an Internet connec-
tion. If you have any questions regarding any of your PPTP connection settings,
contact your ISP.
1. In the router configuration pages, click the
Point-to-Point Tunneling (PPTP)
2. Select the
My ISP uses a PPTP connection
3. Enter your Domain or IP address of your PPTP server in the
and
User name
method, either select or deselect the appropriate checkboxes.
4. When you are finished, click
have an Internet connection. You can go to the Status page to view your connec-
tion information.
192.168.2.1
section.
from your ISP. If your ISP uses a specific authentication
Password
. The router will restart and you should then
Save
and press
button in your web browser or
Back
tab and scroll down to the
Internet
checkbox.
English
to access the
ENTER
field, and the
Server
5

Publicité

Table des Matières
loading

Table des Matières