Conceptronic CBTHS3 Guide D'utilisation page 13

ENGLISH
Pairing the Bluetooth
4.
Before you can use the Headset with your mobile phone, you need to
pair the Headset with your mobile phone.
(Your mobile phone needs Bluetooth
Note: Before you start pairing, refer to the manual of your mobile
phone and check how to pair your mobile phone with
Bluetooth
A. Make sure the Stereo Headset is turned off.
B. Press and hold button "2" (Blue) on the headset for more than 4
seconds. The headset will turn on (Blue LED) and will enter
pairing mode (Blue and Red LED will flash alternatively).
C. Turn on your Bluetooth
mobile phone to activate the Bluetooth
and search for new Bluetooth
D. The headset will be shown as "CBTHS3" on your mobile phone.
Select the headset on your mobile phone.
E. Your mobile phone will prompt for a pin-code during pairing.
Enter "0000" to complete the pairing process.
F. When the pairing process is successfully completed the blue LED
on the headset will flash. The headset is now in standby mode
now and will connect to your mobile phone automatically.
Note: If pairing is not possible during a period of approximate 1
minute the process will be stopped. You will have to repeat
step A & B to initiate the pairing mode again.
®
Headset with your phone
devices.
®
mobile phone; follow the manual of your
®
®
Functionality enabled).
device pairing process
®
devices.
®
13