Filter Lamp Reset; On/Off Timer - Fujitsu AIRSTAGE UTY-RNK Serie Mode D'emploi

FILTER LAMP RESET

Some indoor unit models are equipped with a filter lamp in the indoor unit display to indicate when it is time to clean the air
filters.
Press the " MAINTENANCE / FILTER RESET" button for 2 seconds or more. The indoor unit filter lamp will go off and the
filter display will disappear.

ON/OFF TIMER

Instructions related to heating are applicable to "HEAT PUMP MODELS" and "HEAT RECOVERY MODELS" only.
The timer function is not available depending on the unit.
To set the ON/OFF timer
1
No display
NON OFF
STOP TIMER
G To cancel the timer mode
• Press the "TIMER DELETE" button to cancel the timer mode.
• The timer mode can also be canceled by changing the timer mode using the "
CLOCK ADJUST" button.
En-7
Press the " TIMER MODE /
CLOCK ADJUST" button to select
the ON timer, OFF timer or weekly
timer.
It is switched every time as shown
in the below diagram when the
button is pressed.
ON WEEKLY
TIMER TIMER
Decrement Increment
2
From 1 to 24 hours
Press the " " button or "
The timer starts automatically when an unoperated 3 sec-
onds is passed after the timer setting is completed.
The amount of time until the OFF timer operates that is dis-
played on the timer display decreases as time passes.
The time can be changed by the Decrement/Increment but-
tons after the timer is once set.
SU MO TU WE TH FR SA
ex. OFF timer set for 6 hours
" button to set the time.
TIMER MODE /