Operation - Marechal Electric DSN Mode D'emploi

►OPERATION (1/2)

• Only devices with compatible contact configurations and
electrical ratings will mate.
• The socket-outlet is shielded by a protective lid held in the
closed position by a latch. Depress this latch to release the lid.
• To connect, align the red marks on the housings. Insert the
device and turn clockwise until the stop. The device is in the
rest position, circuit open.
• Push the device fully home until latched. If any, use the
finger draw plates. The finger draw plates must be assembled
on the devices as follows.
IS 06-2 [DSN] Rev A.0 - 2022-01
17/71 . ,