Accessories; How To Use Your Steam Cleaner - TOSCA DUPRAY Manuel D'utilisation

19
10
16
15
11
14
12 13 34

ACCESSORIES

10. STEAM HOSE 16. HOSE LOCKING PIN
11. STEAM RELEASE TRIGGER 17. EXTENSION TUBES
12. STEAM PRESSURE 18. EXTENSION TUBES
CONTROL BUTTON LOCKING PIN
13. STEAM PRESSURE 19. RECTANGULAR TOOL
INDICATORS
20. CLOTH HOLDING CLIPS
14. ACCESSORY
21. TRIANGULAR TOOL
LOCK / RELEASE
22. WINDOW TOOL
15. STEAM HOSE
CONNECTOR 23. LANCE
All manuals and user guides at all-guides.com
24 25 26
22
20
28 30
21
23
32 29
35 36
18
33
17
24. LARGE NYLON BRUSH 31. REFILLING BOTTLE
25. SMALL NYLON BRUSH
32. MICROFIBER CLOTH
26. SMALL BRASS BRUSH 33. MICROFIBER PAD
34. LOW WATER INDICATOR
27. SMALL STAINLESS
STEEL BRUSH
35. TRIANGULAR TOOL
MICROFIBER BONNET
28. STEAM SCRAPPER
36. RECTANGULAR TOOL
29. PLUNGER TOOL
MICROFIBER BONNET
30. STEEL WOOL
27

HOW TO USE YOUR STEAM CLEANER

1. Remove the boiler cap (1) and fill the tank with up to 0.5 gallon / 1.8 litres of regular tap water. Securely replace
the boiler cap. The refilling bottle is 30 oz / 900 ml.
31
2. Unravel completely the electrical cord (9). Connect the electrical cord to a 15 or 20 amp 110V/120V power outlet.
(make sure the circuit is not already used by another high wattage appliance).
3. Turn ON the main power switch (2A), press the power button (2), and then press the boiler activation button (3). The SteamReady™
indicator (5) will light up when the steam cleaner is ready to use, after approximately 7-10 minutes of heat up time. This light is only
ON when the unit is at maximum operating pressure. While in use, the light will turn OFF automatically, indicating that the boiler
is producing steam.
4. Connect the steam hose (10) by inserting the steam hose connector (15) in the steam hose connection outlet (7) and press firmly.
5. Select the desired steam pressure (on the hose handle) between minimum, medium and maximum (12).
6. Connect the steam hose (10) to the accessory that you want to use.
7. To release steam, press the steam release trigger (11) on the hose handle.
8. When you are done using your steam cleaner, turn the unit OFF by pressing on the power button (2).
Turn OFF the main power switch (2A) and unplug the machine. Your steam cleaner is now ready for storage after cool down.
WARNING: Always turn OFF the main power switch (2A) when leaving the machine unattended.
9. It is safe to leave water in the boiler when the steam cleaner is not in use. If it is for an extended period of time (months),
then it is best to flush out the remaining water. To do so, follow the water removal instructions as outlined in the maintenance
of the boiler section.
en
8