Before The First Use; Cleaning And Maintenance - Kiwi kcm-7530 Mode D'emploi

BEFORE THE FIRST USE

• Take the appliance and accessories out the box. Remove the stickers, protective foil or
plastic from the device.
• Place the device on a flat stable surface and ensure a minimum of 10 cm. free space around
the device. This device is not suitable for installation in a cabinet or for outside use.
• Put the power cable into the socket. (Note: Make sure the voltage which is indicated on the
device matches the local voltage before connecting the device. Voltage 220V240V 50/60Hz)
600W
• For a perfect taste, carry out 2 or 3 boil processes with fresh water (without coffee). Once all
the water has passed through, switch the appliance off and let it cool down during 5 minutes.
Then repeat the process with fresh water.
USE
• Pour the desired volume of water into the water reservoir. The number of cups can be read
on the water level indicator.
• Add the desired quantity of ground coffee. Replace the filter holder. To switch on, press the
on/off button, the coffee maker will start working and the red pilot light will light on.
• Make sure the glass can is placed correctly on the hotplate.
• When you remove the can from the appliance, a nondrip valve will automatically operate to
stop any drops of coffee dripping onto the hotplate. Replacement of the can automatically
opens the nondrip valve and allows any remaining coffee to filter through into the can.
• Wait until the brewing process is finished and the filter is empty. To switch off the coffee
machine, press the on/off button.. The red pilot light will go off to indicate that the coffee
maker has been switched off.
• The can can remain on the hotplate, which begins to heat up as soon as the coffee maker
is switched on. The hotplate will keep the coffee hot until the coffee maker is switched off
(NOTE: due to safety reasons the hot plate will turn off automatically after a while).

CLEANING AND MAINTENANCE

• Wipe the outside with only a slightly moistened cloth ensuring that no, moisture, oil or
grease enters the cooling slots.
• Clean the appliance with a damp cloth. Never use harsh and abrasive cleaners, scouring pad
or steel wool, which damages the device.
• Never immerse the device in water or any other liquid. The device is not dishwasher proof.
GUIDELINES FOR PROTECTION OF THE ENVIRONMENT
This appliance should not be put into the domestic garbage at the end of its durability, but must be
offered at a central point for the recycling of electric and electronic domestic appliances. This symbol
on the appliance, instruction manual and packaging puts your attention to this important issue. The
materials used in this appliance can be recycled. By recycling of used domestic appliances you contribute
an important push to the protection of our environment. Ask your local authorities for information
regarding the point of recollection.
KCM-7530 Instruction Manual
5