Preventing Screen Burn-In - Samsung 5 Serie Guide De L'utilisateur

Temporary image retention may occur when viewing a static image on the set for more than two hours.
N
After selecting Zoom1, Zoom or Wide Fit:
N
Press the ◄ or ► button to select Position, then press the ENTER
Press the ▲ or ▼ button to move the picture up and down.
Reset: Press the ◄ or ► button to select Reset, then press the ENTER
You can initialize the setting.
After selecting Screen Fit in HDMI (1080i/1080p) or Component (1080i/1080p) mode, you made need to center the picture:
N
Press the ◄ or ► button to select Position, then press the ENTER
Press the ▲, ▼, ◄ or ►button to move the picture.
Reset: Press the ◄ or ► button to select Reset, then press the ENTER
HD (High Definition): 16:9 - 1080i/1080p (1920x1080), 720p (1280x720)
N
Settings can be adjusted and stored for each external device you have connected to an input of the TV.
N
Input Source
ATV, Video, Component (480i, 480p)
Component (720p)
DTV(1080i), Component (1080i, 1080p), HDMI (720p, 1080i, 1080p)
Digital NR

If the broadcast signal received by your TV is weak, you can activate the Digital Noise Reduction feature to help reduce any static
and ghosting that may appear on the screen.
• Off: Turns the Digital NR function off.
• Low: Sets Digital NR to low.
• Medium: Sets Digital NR to medium.
• High: Sets Digital NR to high.
• Auto: Sets Digital NR to Auto.
HDMI Black Level

You can directly select the black level on the screen to adjust the screen depth.
• Normal: The screen gets brighter.
• Low: The screen gets darker.
This function is active only when an external device is connected to the TV via HDMI.
N
HDMI Black Level function may not be compatible with all external devices.
Film Mode

The TV can be set to automatically sense and process film signals from all sources and
adjust the picture for optimum quality.
• Off: Basic video image processing applied and No auto-detection for
film-based programs.
Auto: Automatically adjusts for the best image quality between film and
•
video programs.
Film mode is supported in TV, Video, Component (480i / 1080i) and HDMI
N
(1080i).
Screen Burn Protection

Configures the Screen Burn Protection options to prevent and reduce pixel burn.
When an image remains in one position too long, it may cause a permanent burn on the screen.

Preventing Screen Burn-in

To reduce the possibility of screen burn, this unit is equipped with screen burn prevention technology. This technology enables you
to set picture movement up/down (Vertical Line) and side to side (Horizontal Dot).
The Time setting allows you to program the time between movement of the picture in minutes.
• Pixel Shift: Using this function, you can minutely move pixels on the PDP in horizontal or vertical direction to prevent after-
images on the screen.
Optimum condition for pixel shift;
N
Horizontal
Vertical
Time(min.)
Item TV/AV/Component/HDMI
0~4
0~4
1~4 min.
English - 4
button.
E
button.
E
button.
E
button. The TV will be reset to 16:9.
E
Picture Size
1:, Zoom1, Zoom, 4:
1:, Wide Fit, 4:
1:, 4:, Wide Fit, Screen Fit
Color Tone
Size
Digital NR
HDMI Black Level
Film Mode
Screen Burn Protection
2
2
2 min.
Tint (G/R) : G50/R50
Advanced Settings
Picture Options
►
Picture Reset
Picture Options
: Normal
: 16:9
: Auto ►
: Normal
: Off
Move Enter Return
Continued...