Technical Data; Intended Use - Rupes GTV 16 Notice D'utilisation

WELDY.book Seite 8 Mittwoch, 17. Mai 2006 1:02 13

Technical Data

Voltage [V] 230
Frequency [Hz]
Power [W] 1600
Current con- [A]
sumption 7
Switch positions
Position I
Temperature [°C] 350 500
[°F] 660 930
Position I
Air flow [l/min] 350 500
[cfm] 12.5 17.5
Weight [kg] 0.68
with cord [lbs] 1.5
Dimensions [mm]
L x B x H [inch]
Protection class

Intended Use

When observing the safety rules and using the original accessories, this hot air tool is intended for all appli-
cations with hot air that are listed in these operating instruction
Applications
Shrinking of shrinkdown tubing, solder connectors and solder terminals, packaging and electrical
components.
Deforming of articles made from acrylic, PVC, and polystyrene, tubing, plates and profiles, as well as
moist woods.
Welding of thermoplastic polymer, flooring materials of PVC and linoleum, PVC-coated fabric, tar-
paulins and foils.
Soldering of tin, special silver solder, SMD elements, cable lugs, and for loosening soldered connec-
tions.
Paint removal - Removal of old and even thick coatings of oil paint, varnish and synthetic plaster.
Drying of colour shade samples, filler, adhesives, construction joints and stucco forms.
Joining adhesives – Large-surface gluing with contact adhesives, activation of pressure-sensitive
adhesives, acceleration of bonding processes, releasing of bonding points as well as releasing or
bonding of edge band or venee.
Defrosting of icy stairs and steps, door locks, trunk lids, car doors or water pipes, as well as for
defrosting refrigerators and ice boxes.
Disinfection – With hot air of 600 °C, you can quickly rid animal sties/stables of bacteria. Wood-
worm infestation can be controlled (Caution: Danger of fire! Do not heat up the wooden surface exces-
sively).
Attaching the Nozzle onto the Heating-element Tube 3
A falling down nozzle can set an object on fire. Nozzles must be mounted firmly and secure on the
unit.
Touching a hot nozzle can lead to serious burns. Before attaching or replacing a nozzle, allow the
unit to cool down completely or use a suitable tool.
A hot nozzle can set a surface on fire. Place down hot nozzles only on fire-proof surfaces.
An incorrect or defective nozzle can lead to heat accumulation and damage the unit. Use only origi-
nal nozzles according to the table that are suitable for your unit.
A
B
C
English - 8 -
A
120 100 230
50/60
1200 1100 1800
10 11 8
0 - l - ll
II I II I II
500 500 100–550
930 930 210–1020
II I II I II I
250 400 250 400 250
8.8 14 8.8 14 8.8
0.74 0.74 0.72
1.63 1.63 1.6
II/
B
120 100 230
50/60
1400 1200 2000
12 12
0 - l - ll
Manually adjustable Electronically adjustable and controlled
80–550 80–550 80–650
180–1020 180–1020 180–1200
II I II I II
550 250 450 250 450 200–550
19.5 8.8 16 8.8 16 7–19.5
0.78 0.78 0.78
1.72 1.72 1.72
230 x 80 x 240
9.1 x 3.2 x 9.5
(Double insulated)
C
120 100
50/60
1500 1300
9 13 13
0 - l
80–650 80–650
180–1200 180–1200
Electronically adjustable
200–500 200–500
7–17.5 7–17.5
0.84 0.84
1.85 1.85
A B C