Installing Casters - Tripp-Lite CSHANDLEKIT2 Guide D'installation

Installing Casters

The CSHANDLEKIT2 contains four swivel/locking casters and four
caster risers. To install, use a wrench (not included) to attach the
M6 x 120 mm hex head screws, M6 lock washers, and risers to the
charging station.
M6 x 120 mm
x16
Installing Cord Manager
To install the cord manager, use the 4 mm hex key to secure the M6 x 15 mm hex screws (four per bracket) to the charging station cabinet.
Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice.
M6 Lock Washer Riser
x16 x4
M6 x 15 mm
x8
1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support
Installing Handle
To install the handle bracket, use the included 4 mm hex key to attach
the M6 x 15 mm hex screws to the charging station cabinet.
2
M6 x 15 mm
x4