Burda Combio-868 HE Guide Rapide page 7

Commissioning
Device becomes hot in use!
Risk of burning!
• Ensure that the radio receiver 2 kW is sufficiently
Warning!
well-ventilated.
• Do not use any highly inflammable or inflammable
materials near to the radio receiver 2 kW .
PE (Green-yellow)
1.
STAS3
1 = N (Blue)
2 = L
3 = L (bridged with 2)
Lead
Consume load
PE (Green-yellow)
STAK3
I
1 = N (Blue)
2 = L (Black)
3 = free (Brown)
2. Switch off/on mains.
The Combio-868 HE is now ready to program for 5 minutes.
3.
elero
Press the v
4.
button
immediately
when 100% heat
elero
output appears.
Press the b
5.
button
immediately
when 50% heat
elero
output appears.
The transmitter is now programmed.
Caution!
I
Do not connect N to N .
U different potentials
Heating system
alternates between
100% and 50%
output for 2 minutes.
Heating goes off
for a short time.
elero
Heating goes
off.
elero
Programming other transmitters
Programming possible for max. 16 transmitters.
To programm further transmitters, proceed as
follows:
1.
elero
elero
Programmed transmitter
2. Press the v
button
immediately
when 100%
elero
heat output
appears.
Press the b
3.
button
immediately
when 50%
heat output elero
appears.
The transmitter is now programmed.
Note: If several receivers are connected to the same feed line,
then all are simultaneously ready to program.
The heating system starts at random.
The longer you wait with the programming the greater
will be the offset.
Individual channels/transmitters can now be assigned to
the respective receiver.
You can stop the flashing if you briefly push the
STOP button of a transmitter which has already been
programmed.
The channel assignment/change can now be made
without you having to disconnect the individual
receivers.
Switching on the heating system:
Precondition: The transmitter is programmed.
Press the UP or DOWN button.
Switching off heating system:
Press the STOP button.
Note: The radio receiver 2 kW switches off the heating to which
it is connected automatically after 12 hours.
or
Heating system
alternates
between 100%
and
and 50% output
for 2 minutes.
Heating goes off for
a short time.
elero
Heating goes off.
elero