General Information; Explanation Of Buttons - Burda Combio-868 HE Guide Rapide

General information

The radio receiver 2 kW enables you to turn heating systems of up
to 2 kW output on and off by remote control.
It is also possible to switch the heating system down to 75% and
50% of its output.
The radio receiver 2 kW is only suitable for use with
heating systems with a nominal rating of
max. 2 kW.
Do not connect other consumers or apparatus to
Warning!
the device!
Read the operating instructions of the heating
system.
Optimal use of the radio signal
• Do not bend the antenna.
• Do not shorten or extend the antenna.
• If reception is poor, adjust the antenna.
• Install the antenna so that it is as exposed as possible.
• Antenna is not to rest on metal.
• Using a number of receivers may cause interference.
Note: Radio systems, which operate on the same frequency, can
lead to reception of interferences.
Please note, that the range of the radio signal is limited by
the government and the built environment.

Explanation of buttons

v-button (switch on)
STOP button (switch off)
m y
b-button (switch on)
elero
Programming button P
Transmission
indicator lamp
Back of housing
Programming
button P
v-button (switch on)
STOP button
y
(switch off)
b-button (switch on)
elero
Screw