Service & Support - sunjoe AJWV100 Manuel De L'opérateur

3. Remove the 5 screws used to fix the squeegee blade in
place (Fig. 8).
Fig. 8
Remove the screws
4. Grab the end of the squeegee blade and pull it out from
the nozzle assembly (Fig. 9).
Fig. 9
Nozzle assembly
5. Clean the squeegee blade and the nozzle assembly under
running water. Air dry before reassembly.
NOTE: Do not clean the cleaner motor housing under
running water, instead, use only mild soap and a damp
cloth to clean. Do not use detergent that contains
gasoline, turpentine, lacquer thinner, paint thinner,
chlorinated cleaning solvents, ammonia, acetone, or
household detergents containing ammonia since these
cleaning agents and solvents are harmful to plastics and
other insulated parts. Never use flammable or combustible
solvents around tools.
Storage
• Examine the cordless window vacuum cleaner thoroughly
for worn, loose or damaged parts. Should you need to
repair or replace a part, contact an authorized
Snow Joe + Sun Joe
® ®
Sun Joe customer service center at 1-866-SNOWJOE
®
(1-866-766-9563) for assistance.
• Store the window vacuum cleaner upright with the charger
indoors in a clean, dry and locked location that is free
from dust.
Squeegee blade
dealer or call the Snow Joe
Service + Support
If your Sun Joe
®
service or maintenance, please call the Snow Joe
customer service center at 1-866-SNOWJOE
(1-866-766-9563).
Model + Serial Numbers
When contacting the company, reordering parts, or arranging
service from an authorized dealer, you will need to provide the
model and serial numbers, which can be found on the decal
located on the housing of the unit. Copy these numbers into
the space provided below.
Record the following numbers from the housing or handle of your
new product:
A J W V 1 0 0
+
®
8
AJWV100 cordless window vacuum requires
Model #:
Serial #:
+ Sun Joe
® ®