Battery Charging - sunjoe AJWV100 Manuel De L'opérateur

Battery Charging

The length of service between each charging varies depending
on the type of work you are doing. The battery in this window
vacuum has been designed to provide maximum trouble-
free life. However, like all batteries, it will eventually wear out.
To obtain the longest possible battery life, we suggest the
following:
• Store and charge your cordless window vacuum cleaner
in a cool area. Temperatures above or below normal room
temperature will shorten battery life.
• Never store the cordless window vacuum cleaner with
the battery in a discharged condition. Recharge the unit
immediately after it is discharged.
• All batteries gradually lose their charge. The higher the
temperature is, the faster they lose their charge. If you
store your cordless window vacuum cleaner for long
periods of time without using it, recharge the battery every
6 months. This will extend battery life.
NOTE: The cordless window vacuum cleaner has been
shipped in a low charge condition and should be fully charged
before use.
1. Plug the charger adapter into an appropriate AC power
outlet. Connect the charger adapter and the window
vacuum cleaner's charge socket with the USB charger
cable, as shown (Fig. 3).
Charger
adapter
USB charging
cable
Charge socket
2. The battery will take approximately 4 hours to charge. The
battery indicator LED will flash in red during the charging
process. Unplug the charger when the LED is illuminated
in blue.
3. Timely recharging of the tool will help prolong the battery's
life. You must recharge the tool according to the charger
level indicator.
NOTE: This charger will automatically turn off 30 mins
after the battery is fully charged. The blue battery charge
indicator will turn off when the charger is off.
IMPORTANT! Never allow the tool to become fully discharged
as this will cause irreversible damage to the battery.
Operation
This appliance is intended for indoor use for cleaning damp,
smooth surfaces such as windows, mirrors or tiles, in
accordance with the instructions provided in this manual. The
appliance is not intended to vacuum up debris on the floor,
drains or containers.
m
WARNING!
that are not recommended by the manufacturer. The use of
attachments or accessories not recommended can result in
product damage.
General Vacuum Procedure
1. Before using the window vacuum, wet the surface to be
cleaned with sprayer. Or use a sponge filled with water or
proper detergent to wipe the surface.
2. Grab the window vacuum cleaner by the handle. Place the
squeegee blade against the upper part of the surface to
Fig. 3
be cleaned (Fig. 4).
3. Turn on the window vacuum cleaner by squeeze the On/
Off switch (Fig. 4).
Fig. 4
On/Off
switch
6
Do not use any attachments or accessories