Kohler Purist K-9583 Guide D'installation page 4

2. Install the Brackets
CAUTION: Risk of personal injury andproduct damage. If one bracket is out of level with the other, lavatory
could break. Shim as needed between bracket and wall.
- Attach the brackets to the wall using the proper lag screws (not provided). The type of lag screw needed will vary
according to the finished wall.
- Place a level on brackets at both ends (near wall and away from wall), and verify that brackets are level with each
other.
- Install the lavatory according to the installation instructions packed with it.
3. Install the Bracket Covers
NOTE: Make sure to use the correct bracket cover for a left or right-handed bracket. Screw holes should face
inward.
- Place the bracket covers over the brackets.
- Use the machine screws provided to attach the bracket covers.
A
1012578-2-
Bracket
Lag Screw
4
Bracket
Machine Screw
Bracket Cover
Kohler Co. Kohler, WI, U.S.A.