Product Specification - Inateck P7 Mode D'emploi

Transfer EAN-13 to ISSN
Enable EAN-2
Enable EAN-5
To recharge the P7 barcode scanner
When the scanner is low in battery, the yellow indicator flashes. To recharge the barcode
scanner, please use the USB cable included, and connect the barcode scanner to the USB
port of a working computer or a 5V charger. When the barcode scanner is being recharged,
the red LED indicator is on. It goes off when the barcode scanner is fully recharged.

Product Specification

Model Number
Battery Capacity
Memory
Applicable Barcodes
Resolution
Print Contrast
Decode Angles
Bluetooth transmission band
(Bluetooth Mode)
Bluetooth transmission power
(Bluetooth Mode)
Wireless transmission band
(Wireless Adapter Mode)
Wireless transmission power
(Wireless Adapter Mode)
P7
2600mAh
32Mb
Codabar, Code 11, Code 128, Code39, Code 93, EAN-8, EAN-13, ISBN, ISSN, MSI,UPC-A, UPC-E, IATA 25,
Industrial 25 / Standard 25, Interleaved 25,Matrix 25, China Postal Code, FedEx, USPS, Code 32, VIN,
Plessey, Telepen
3mil
20%
Roll 30º，Pitch 75º，Yaw 80º
2.402GHz-2.480GHz
4dBm
433.05MHz-434.79MHz
7dBm
（*）Do not transfer EAN-13 to ISSN
（*）Disable EAN-2
（*）Disable EAN-5
EN
13