Labelling In The Instructions Manual; Field Of Application And Product Description; Intended Use; Technical Data Bona Optispread Ux - Bona OptiSpread UX Manuel D'utilisation

Operating instructions
Parts of this instructions manual correspond to operating instructions. In particular, the use
and protective measures described under points 5 – 9.

2.3. Labelling in the instructions manual

Attention danger! The safety instructions marked with this symbol must be observed.
Failure to comply can cause serious and far-reaching damage to health as well as immense
damage to property.
Information.
Under this sign you will find helpful tips and information.

3. Field of application and product description

3.1. Intended use

The Bona OptiSpread UX is a parquet adhesive applicator, among other things specially
developed for the application of the high viscosity adhesive Bona R848T. Basically, other
adhesives produced by Bona GmbH Germany can also be pressed out in the 9 kg foil
bag. The device should enable you to perform your work faster, easier and above all more
ergonomically.
By pressing the on/off switch, the adhesive is pressed out of the nozzle and can thus be
applied quickly and evenly to the subfloor.
The ElektraFlow® drive used forces the adhesive easily and evenly out of the adhesive
nozzle. On the one hand, the application quantity of the adhesive can be adjusted
individually for each work process by the different toothings, the application speed and/or
the feed rate.
6
Operating manual

3.2. Technical data Bona OptiSpread UX

Length:
Weight (empty):
Inner diameter
Filling tube:
Tubular bag size:
Nozzle:
Material piston:
Application width:
Adhesives:

3.3. Technical data battery

Type:
Voltage:
Mains voltage:
Charging time:
Reach:

4. Product safety instructions

4.1. Device safety

Therefore, read the instructions manual of the tool carefully before start-up and familiarise
yourself with the product. This is the only way to ensure safe and proper operation.
1030 mm [Toothed rack retracted)
2300 mm [Toothed rack extended]
12 kg [filled approx. 20 kg]
100 mm
9 kg
PVC adhesive nozzle with teeth 1000 F
[TKB B10] (optionally available 1500 F/G)
POM-DELRIN
500 mm
Bona silane adhesives in 9 kg foil bag
Li battery
18 Volt 2 A
100-240 V 50-60 HZ 60 Watt
approx. 35 – 45 minutes
approx. 60-80 m²
Improper use of the device, accessories and electrical components can cause
damage to health, property, malfunctions and damage to the device. The device
may only be used for its intended purpose.
EN
Operating manual
7