Important Information; Ec Declaration Of Conformity; What You Need To Know About This Instructions Manual - Bona OptiSpread UX Manuel D'utilisation

2. Important information

2.1. EC Declaration of Conformity

We hereby declare that the machine described below, in its design and construction
and in the version placed on the market by us, complies with the essential health and
safety requirements of EC Directive 2006/42/EC. In the event of a change to the machine
not agreed with us, this declaration shall lose its validity. EC manufacturer's declaration
according to the Machinery Directive 2006/42/EC, Annex II A.
Manufacturer / Distributor:
Bona AB Germany
Auf dem Aurain 6
65549 Limburg
Description and identification of the machine:
Product designations: Bona OptiSpread UX
Manufacturing year: From August 2021
Item number: AT32046061
Series/type designation: Bona OptiSpread UX
The following harmonised standards were applied:
EN 61310-2:1995 Safety of machinery – Indication, marking and actuation –
Part 2: Requirements for marking (IEC 1310-2:1995)
EN 61310-3:1999 Safety of machinery – Indication, marking and actuation –
Part 3: Requirements for the location and operation of actuators (IEC 61310-3:1999)
EN 614-2:2000 Safety of machinery – Ergonomic design principles –
Part 2: Interactions between the design of machinery and work tasks
EN 55014-1: Electromagnetic compatibility. Requirements for household appliances, electric
tools and similar apparatus – Part 1: Emission
EN 55014-2: Electromagnetic compatibility. Requirements for household appliances, electric
tools and similar apparatus – Part 2: Immunity
EN 60745: Hand-held motor-operated electric tools – Safety – Part 1: General requirements
Thorsten Kusch
Supply Chain Director for EMEA /APAC
Warranty
Bona AB Germany gives a 24-month warranty on this product. During this period, any
material or production defects found on the unit will be repaired by Bona free of charge.
4
Operating manual
Torben Schuy
Product Management
Excluded from the warranty are defects that are not due to material or
production faults, e.g.
• transport damage of any kind
• defects due to improper installation
• defects due to improper use
• defects due to improper handling
• defects resulting from improperly performed repairs or attempted repairs
by persons and/or companies not authorised by Bona
• normal operational wear and tear (e.g. adhesive nozzles)
• cleaning of components
• Furthermore, we do not assume any warranty for devices whose serial
number has been falsified, changed or removed.
A warranty claim also expires if parts are installed in the device that are not approved
by Bona GmbH. Claims that go beyond free fault rectification, such as claims for damages,
are not part of the scope of warranty.
Make a note of the serial number of your Bona OptiSpread UX which is located on the
bottom cover of the unit:
Purchase date __________________________________________________________________
Serial number (please enter) ______________________________________________________
This should be indicated as best as possible with the date of purchase and invoice number
for questions, suggestions and complaints.

2.2. What you need to know about this instructions manual

Pay special attention to the instructions in bold in this manual, which are very important for
the use of the Bona OptiSpread UX. The information in brackets is general and serves for
better understanding.
Significance of the instructions manual
The instructions manual is part of the product, read it carefully as well as the quick start guide
before first use to familiarise yourself with the Bona OptiSpread UX and to be able to work
optimally with this tool. The instructions manual must be retained throughout the service life
of the Bona OptiSpread UX and passed on to subsequent owners and users.
EN
Operating manual
5