Usb Type-C; Hdmi Out; Real Time Clock (Rtc); Controlling With An External Pc - Kimex 160-4065T Manuel D'utilisation

cause physical damage to the USB player and the USB device
itself. Do not pull out your drive while playing a file.

USB TYPE-C

Multiple protocols and power delivery up to 5V@1.5A
are supported via USB-C receptacle on your Display.
USB Type-C features are compatible with the devices
that meet the USB-Type-C-Specification. 4K video
stream (if the source supports DP alternate mode),
USB 2.0 data transmission and 5V@1.5A power de-
livery are supported through the USB-C connection
that handle the plug orientation.
Note: It is recommended to use Electronically Marked USB-C
to USB-C cable for video stream over Type-C connection.
Also e-marked USB-C to USB-A cable can be used for data
transmission.

HDMI Out

The HDMI port located on the rear left side of the
Display functions as an output port (upper HDMI port,
HDMI Out). This port will not function as an input, thus
no source devices should be connected to this port.
Only the content received from the HDMI1 input port
located also on the rear left side of the Display (the one
under the HDMI Out port) can be outputted from this
port. The content received from other inputs, such as
VGA or Display Port, can not be outputted. This is a de-
fault function and you can not disable/enable through
any menu option. HDMI Out port will always function
if a source device is connected to the HDMI1 input.

Real Time Clock (RTC)

Your Display has an RTC. It is used to maintain the
real date and time information for a period of time if
the energy supply is interrupted by separating the
Display from the mains or by a power blackout. In this
case the Display will use the date and time information
stored in RTC.
• All time sources are able to override RTC date/time.
• Display tries to connect to the NTP server periodical-
ly (6 hours after last update) to get the current date
and time information. If the Display successfully gets
this information from the NTP server, it updates itself
and RTC with the received date and time information.
If the NTP server update fails, the Display uses RTC
time and date to update itself.
• The RTC battery provides power to the integrated
real-time clock and the calendar. Without any
external power source, RTC is able to function for a
minimum of 14 days.
• If RTC is used as time source, manual date-time
set is enabled from the Date & time option in the
Settings > Device Preferences menu.
Controlling With An
External PC
1.
RS-232 Input Socket (3.5mm)
2. RS-232 to 3.5mm serial cable (commercially
available)
3. To COM port
4. RS-232 to USB adapter
5. PC
You can control the Display from an external PC via
RS-232 (COM port) or LAN (Ethernet port) on the
PC. For instance, system source can be changed by
RS-232 from remote computer. When a command is
sent from the PC to the Display, the Display operates
according to the received command and sends a
response message to the PC.
Equipment/Tools
• RS-232 (3.5mm) to RS-232 (male) cable or LAN
cable (connected via router)
• USB to RS-232 (male) adapter
• Notebook or PC which has USB or LAN port
• Installed program on remote PC to send commands:
In general, the RS-232 commands are sent for
operating the implemented functions via serial port
English - 25 -