device to pairing mode. Available devices will be
recognised and listed or pairing request will be
displayed. Select your device from the list or highlight
OK when the pairing request is prompted and press
OK to start pairing.
Connected devices will also be listed under this
section. Highlight the device name and press OK
to access detailed information on the device and
additional settings listed below.
Unpair: Unpair the device from the Display.
Change name: Change the name of the device.
Battery: Displays the percentage of battery life
remaining in the device's battery.
Display Options Menu Content
If you switch the Display to a source other than Home,
the Display options menu will be available. Press the
Menu button on the remote to see the Display options
menu. To switch the source you can either press the
Source button on the remote or tap on the Source
button on the General Tools Bar.
As mentioned earlier in the General Use section, the
Display options menu is not fully compatible with the
touch screen. So it will be more convenient to use the
remote control when navigating through the menu.
Note that some options in the Display Options menu
may not be available depending on the model and its
features.
Display Options
Source
Display the list of input sources. Highlight the desired
one and press OK to switch to that source.
Picture Mode
Set the picture mode to suit your preference or require-
ments. Picture mode can be set to one of these options:
User, Standard, Vivid, Sport, Movie and Game. You
can use User mode to create customised settings.
Go to Settings > Device Preferences > Picture for
detailed setting options.
Display Mode
Set the aspect ratio of the screen. Select one of the
predefined options according to your preference.
Speakers
To hear the Display audio from the connected
compatible audio device set as External Audio
System. Set as Display Speakers to use the speakers
of your Display for sound output.
Power
This menu has the same options as in the Settings >
Device Preferences > Power menu. Check the Timer
and Screen Saver options in the Settings > Device
Preferences menu and the Auto Sleep option in the
Display Options > Advanced Options menu for more
power related functions.
Picture off: Turn the screen off. Press a button on
the remote or on the Display to turn the screen on
again. Note that you can not turn the screen on via
the Volume +/-, Mute and Standby buttons. These
buttons will function normally.
Switch off timer: Define a time after which you want
your Display to switch off automatically. Set as Off
to disable.
No Signal Auto Power Off: Set the behaviour of the
Display, when no signal is detected from the currently
set input source. Define a time after which you want
your Display to turn itself off or set as Off to disable.
Power Mode: Change the operation mode of the
Display that you set during the first time installation.
You can set this option to Reactive for normal
operation or to Eco for an energy-efficient operation.
Advanced Options
Setup
Blue Mute: Turn this function on/off according to your
preference. When turned on, blue background will be
displayed on the screen when no signal is available.
Auto Sleep: Define an idle time after which you want
your Display to enter sleep mode automatically. 4
Hours, 6 Hours and 8 Hours options are available.
Set as Never to disable.
Version Info: Display system information such as
Model Name and Version.
Settings
Refer to the Settings Menu Content section for
detailed information.
Installing Third Party
Applications
Check if the installation of apps from sources other than
the Play Store is allowed from the Settings > Apps >
Permissions > Security & restrictions menu. If the
checkbox next to the Unknown sources option is not
checked, highlight this option and press OK. Then
follow the below mentioned steps in order to install a
third party application.
• Copy the file with the extension ".apk" onto a FAT
formatted USB storage device
English - 21 -