Maintenance Instructions - Lifetime CLIMBING DOME Instructions De Montage

MAINTENANCE INSTRUCTIONS

If routine checks and maintenance procedures are not done, the equipment could overturn and/or
become a hazard.
At the beginning of each play season:
• Tighten all hardware.
• Lubricate all metallic moving parts.
• Check all protective coverings on bolts, pipes, edges and corners. Replace if they are loose, cracked or missing.
• Check all moving parts including swing seats, ropes, cables and chains for wear, rust or other
deterioration. Contact customer service for replacement parts.
• Check metal parts for rust. If found, sand and repaint using a non-lead-based paint meeting the
requirements of 16 CFR 1303.
• Reinstall any plastic parts, such as swing seats or any other items that have been removed for the cold
season.
• Rake and check depth of loose-fi ll protective surfacing materials to prevent compaction and to
maintain appropriate depth. Replace as necessary. (See page 7)
Twice a month during play season:
• Tighten all hardware.
• Check all protective coverings on bolts, pipes, edges and corners. Replace if they are loose, cracked or
missing.
• Rake and check depth of loose-fi ll protective surfacing materials to prevent compaction and to
maintain appropriate depth. Replace as necessary. (See page 7)
Once a month during play season:
• Lubricate all metallic moving parts.
• Check all moving parts including swing seats, ropes, cables and chains for wear, rust or other
deterioration. Contact customer service for replacement parts.
o o
At the end of each play season or when the temperature drops below 40 F (5 C):
• Remove plastic swing seats and other items and take them indoors or do not use.
• Rake and check depth of loose-fi ll protective surfacing materials to prevent compaction and to maintain
appropriate depth. Replace as necessary. (See page 7)
• If the warning sticker is illegible, destroyed, or removed, contact the Customer Service Department
at 1-800-225-3865 for a replacement.
Disposal Instructions:
Disassemble and dispose of the playground equipment in such a way that no
unreasonable hazards will exist at the time the equipment is discarded. Follow all local disposal
requirements.
26