Technical Data; Safety Instructions - oneConcept 10004236 Mode D'emploi

Dear Customer,
Congratulations on purchasing this equipment. Please read this manual carefully and take care of the following
hints to avoid damages. Any failure caused by ignoring the mentioned items and cautions mentioned in the
instruction manual are not covered by our warranty and any liability.
Item number
Lens
Sensor
LCD
External memory
Exposure and color balance
Scan high resolution
Data conversion
Scan-Method
Light source
Power supply
• Do not expose this product to rain or moisture to preserve the life of your product.
• Do not disassemble this unit. To prevent the risk of electric shock, do not remove cover.
• The device should be situated so that its location or position does not interfere with its proper ventilation.
• For example, the unit should not be situated on a bed, sofa, rug or similar surface that may block the venti-
lation openings.
• The device should be situated away from sources of high heat such as radiators or stoves.
• We strongly suggest using a clean, dry, non-alcohol cotton swab to clean the glass surface periodically to
produce a clear image.
• The USB cord for the device should be unplugged from the computer when the unit is left unused for a long
period of time.
• Do not overload the USB connections on your computer. If you have too many devices connected to your
computer such as a wireless mouse, media player, mobile phone or other USB powered devices. There may
not be enough power for the film & photo scanner to operate properly.
• The user should not attempt to service the device beyond those means described in the operating instruc-
tions. All other servicing should be referred to qualified person.
• The design of the film holder is follows ISO standard. In some cases the holes on the film will not match
exactly to the alignment of the holder. This is caused by using a non-standardized film. In this case there will
be a small black line on the edge of the frame that can easily be cropped out using photo editing software.

Technical Data

10004236
F/NO = 4 f = 3.93
F/NO = 3.97 f = 4.04
5.1 Megapixel CMOS Sensor
2,4 Zoll LTPS LCD Display
SD/MMC/MS/XD/MS-PRO Karte
automatisch
10M Erweiterungsauflösung
12 bits pro Farbkanal
Einzelschritt
7*2 weiße LED/Hintergrundlicht (3 weiße LED)
USB 2.0

Safety Instructions

17